Ricoh MP7240A Specifications download pdf (Page 83)

6.6.1 Connection

6.6 Network

Enter network details and configure network settings such as the bandwidth, port number and user

connection number.

IP Auto Allocation (DHCP) : Check the IP Auto Allocation box to receive the address automatically

from the DHCP server if the DVR is connected to a DHCP network. If connected to a LAN network

without a DHCP server, then manually enter the network details for the connected network, input IP

address, subnet mask and gateway.

Auto DNS Server setting : Input first DNS server address to main DNS server and support DNS server.

Bandwidth : Set up the maximum bandwidth for the DVR data transmission by network.

Acceptable count : Set up the acceptable number of connected clients (remote users).

[Note]

• Please contact the network administrator if you don’t know the IP address or

network situation.

☞

[Note]

• When many clients connect to the DVR, the system can interfere with basic

operation due to a large load on system resources. The count function is made

to prevent the system from being overloaded by too many users. If this

happens, limit the client connect number.

☞

Port number : Input the network port on which data is transferred. Click on the “Port Check” button to

find if the selected port number is available on your network.

WEB DVR Support : Select to enable or disable the Web DVR facility.

CMS Support : Select to enable or disable the CMS software connection.

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 113 114

No comments

Ricoh MP7240A Specifications Page 83