Ricoh IS330DC - IS - Flatbed Scanner User's Guide download pdf (Page 9)

Chapter 2: Interface

Control Panel

Located at the top left of the Scan module window directly below the menu bar, the buttons allow you to set up the

scan.

•

Feed

Press this button to display a menu. Use this menu to select how drawings will be fed through the scanner

Autofeed: Feed the drawings into the Automatic Document Feeder (ADF).

Autofeed (One): Set the scanner to accept one drawing from the ADF when the Scan button is

pressed.

Pegged: Set the scanner to scan a drawing from the flatbed each time the Scan button is pressed.

Pegged (Many): Set the scanner to automatically scan a drawing from the flatbed every five to ten

seconds (depending on the time required to process the drawings).

Pan Cel: Set the scanner to scan a drawing that is bigger than the scanner window in separate sections.

•

Field Size

Press this button to display a menu. Use this menu to indicate the size of paper of the drawing you want to

scan.

•

Peg Position

Press this button to display a menu. Use this menu to select the location of the peg or registration holes on

the paper you are scanning. The system rotates the images automatically based on your selection.

Bottom Peg: The peg holes appear below the drawing.

Top Pe g : The peg holes appear above the drawing.

Left Peg: The peg holes appear to the left of the drawing.

Right Peg: The peg holes appear to the right of the drawing.

•

Preview

Press this button to test various exposures without saving the image.

•

Resolution

Press this button to display a menu. Use this menu to adjust the capture resolution, which determines the

quality and the size of scanned images. The resolutions that appear depend on the scanner that you

selected using the Scanner button.

•

Save

Save the previewed drawing to the file currently selected in the Drawing List.

•

Scan

Press this button to begin the scanning process.

•

Scan Type

Press this button to display a menu. Use the menu to select scan type that applies to your image. If you

have more than one scanner connected to your computer, only the scanners that support the selected scan

type will be active.

Black and White: Select this option if you are scanning a drawing that you will paint in the Stage or

Paint module.

Greyscale: Select this option to capture the shades of grey in the drawing.

These buttons are used

for scan preparation.

These buttons are used for

the scanning method and

scanning process.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 33 34

Comments to this Manuals

No comments

Ricoh IS330DC - IS - Flatbed Scanner User's Guide Page 9

Comments to this Manuals

Related products and manuals for Scanner Transparancy Adapters Ricoh IS330DC - IS - Flatbed Scanner