Ricoh I700 User's Guide download pdf (Page 133)

131

Using the Extension Functions

Using the RDC-7/i700 Mounter

By installing the RDC-7/i700 Mounter in Macintosh, you can copy data and

make a backup file of the camera in a PC.

Important

Note

• The flash lamp (red) blinks during transmission of data to the PC

except when the camera is connected to a LAN. Do not disconnect the

cable or turn off the camera during transmission as the camera or the

PC may be affected. If the cable is disconnected during transmission,

turn the camera and the PC off and then turn them on again.

• If possible, use an AC adapter and avoid powering the camera by the

battery. If the power fails during operation, the camera and the PC

may be affected.

• In the Finder, you can read and write freely in the files in the camera’s

memory. (However, you cannot write in the camera’s memory from the

application.) If you want to play the files you have written in on the

camera, change the file name format to ‘8 letters + extension’.

• The non-compressed still images are saved in a specific TIFF file

format. The generic graphics applications therefore may not open

those files when you transfer them from the camera to a PC by using

the RDC-i700 Explorer Plug-In. In this case, use the TWAIN function

(P.142) to open the TIFF files. The images transferred from the

camera to a PC by using this TWAIN functon will be converted to the

generic TIFF files.

A Connect the camera correctly to the PC and set the camera’s

mode dial to [ ]. Then turn the camera and the PC on.

B Select [RDC-7/i700 Mounter] from [Control Panels] in the Apple

menu.

The following window will be displayed.

C Select [Port].

If you are using a USB connection, select [USB], if you are using a serial

connection, select [Modem] or [Printer], and if you are using a LAN connection,

select [Ethernet].

1 2 ... 128 129 130 131 132 133 134 135 136 137 138 ... 185 186

No comments

Ricoh I700 User's Guide Page 133