Ricoh Container Stacker User Manual download pdf (Page 23)

1-18 Container Stacker Installation Instructions

20. Disconnect the 4 pin white connector of the DC IF cable of the Printer from the

FNS IF cable (Disconnection 1 on the figure below), then connect it to the RB

cable of the 4 pin white connector coming from Container Stacker (Connection 5

on the following illustration) (70/92 ppm only).

21. Connect the CS relay cable of accessory box of the printer to the 4 pin white

connector of the FNS IF cable and the RB cable of the 4 pin white translucent

connector of the Container Stacker (Connection 5 on the following illustration.)

(184ppm only)

NOTE:

Put the cable through opening “A” of the Printer.

On SW1 mounted on the CPXXX P/K, set switch No. 5 to ON and set switch No. 2

and No. 8 to OFF. (Front Engine of 184 ppm printer)

J23

CST AC Cable

CE AC Cable

Connector : 2 pin white

Connector : 2 pin

Connection 1 and 2 Details

70/92 ppm

CTS AC Cable

M4 Screw

(Connection 3)

Opening A

RB Cable

Connection 5

(4 pin white)

Disconnection 3

(2 pin white)

Connection 4

(20 pin black)

CST FG Cable

CE AC Cable

Connection 2

Connection 1

FNS IF Cable

Disconnection 2

(4 pin white)

Disconnection 1

(4 pin white)

DC IF Cable

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 48 49

No comments

Ricoh Container Stacker User Manual Page 23