Ricoh SCRIPT2 Specifications download pdf (Page 65)

Troubleshooting

Image density is too light. Turning on [Toner Saving] can cause blurring or fine lines not

to be printed. With color printing, toner saving can cause ab-

normal coloring. Try printing again after turning [Toner Sav-

ing] off.

If the message "Low on: xxx" or "Add Toner xxx" is on the

panel display, replace the toner cartridge of the indicated

color. ⇒ P.66 “Replacing the Toner Cartridge”

You might be using paper not supported by this printer. Use

the appropriate type of paper. ⇒ P.21 “Paper and Other Media

Supported by This Printer”

Part of the printout is blurred or

light.

Make the image density darker. ⇒ P.63 “Adjusting the Image

Density”

If the message "Low on: xxx" or "Add Toner xxx" is on the

panel display, replace the toner cartridge of the indicated

color.⇒ P.66 “Replacing the Toner Cartridge”

Check if toner cartridges and the photoconductor unit are set

correctly. If not, set them correctly.

You might be using paper not supported by this printer. Use

the appropriate type of paper.⇒ P.21 “Paper and Other Media

Supported by This Printer”

Check if the surface where the printer is located is level, and

not angled in anyway.

The printout is different from

the specified color.

Check if a specific color is missing. If so, replace the toner

cartridge of the missing color.

Toner is not fused well when

printing on thick paper or OHP

transparencies.

The printer driver setting is not correct. Select [Thick Paper],

or [OHP Transparency] in the paper type setting with the print-

er driver.

The color of the printout is dif-

ferent from the color on the

computer's display.

The toner based color system used by the printer is different

from the light based color system of the computer screen.

Turning on [Toner Saving] can cause color irregularities.

Check the settings on the [Color Setting] tab and restore the

default settings.

The printout is different from

the image on the computer

screen.

Certain applications or image creation methods produce im-

ages that cannot be printed exactly as they appear on the

computer screen.

With the IPDL-C printer driver, checking the [Print as Bitmap]

item on the [Setup] tab causes the print data to be converted

to image data before it is sent to the printer. This produces a

printout closest to that displayed on the computer screen.

Note

❒ This setting also causes large-volume print jobs to take

longer to print because of the required conversion pro-

cess.

Status Possible causes, Descriptions, and Solutions

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 140 141

Comments to this Manuals

No comments

Models	Document Type
MO9000TW	User Manual Avanti MO9000TW User Manual, 40 pages
MO7280TB	User Manual Avanti MO7280TB User Manual, 37 pages
MO7221MB	User Manual Avanti MO7221MB User Manual, 23 pages
MO902SST-1	User Manual Avanti MO902SST-1 User Manual, 36 pages
MO1400SST	User Manual Avanti MO1400SST User Manual, 36 pages
MO9001TB	User Manual Avanti MO9001TB User Manual, 40 pages
MO699SST-1	User Manual Avanti MO699SST-1 User Manual, 37 pages
mo629t	User Manual Avanti mo629t User Manual, 21 pages
MO619M	User Manual Avanti MO619M User Manual, 17 pages
NOT FOUN MO649TW	User Manual Avanti NOT FOUN MO649TW User Manual [es] , 21 pages

Ricoh SCRIPT2 Specifications Page 65

Comments to this Manuals

Avanti MO1040TW manuals

Avanti MO1040TW User Manual (36 pages)

Table of contents

More products and manuals for Microwaves Avanti

Ricoh SCRIPT2 Specifications Page 65

Comments to this Manuals

Related products and manuals for Print & Scan Ricoh SCRIPT2

Avanti MO1040TW manuals

Avanti MO1040TW User Manual (36 pages)

Table of contents

More products and manuals for Microwaves Avanti