Ricoh MV310E Operator's Manual download pdf (Page 147)

APPENDIX A: INSTALLATION

Before installing your machine, read the safety instructions at the beginning of

this manual. To install the machine, follow these procedures:

1 -Find a suitable location for the machine.

2-Remove all the pieces of tape attached to the machine and remove the red

clip on the upper unit (See page 137.)

3-Install the photoconductor, cleaning pad and toner. (See page 138.)

4-Attach the accessories and load the paper in the drawer. (See page 141.)

5-Connect the phone line. (See page 143.)

6-Connect the power. (See page1 45.)

7-Enter all necessary information and settings in your machine’s memory.

(See page 146.)

Machine Environment

WARNING: When choosing a location for your machine, please follow the

safety instruction given on pages i to iv of this manual.

location

For the best possible performance, install your machine in a place which

satisfies the following conditions.

Not exposed to direct sunlight

Well ventilated (air turnover at least three times per hour); to avoid the

build-up of ozone, make sure to locate the machine in a large well-venti-

lated room which has an air turnover of more than 30 yd3/hr per person.

Level

Not subject to vibration

Away from other electronic equipment, to avoid interference

Away from areas containing corrosive gas

Dust-free

Condensation-free

Temperature 63 to 82°F

Humidity 40 to 70% RH (do not install near a humidifier)

Away from heaters and air conditioners, to avoid sudden changes of

temperature

Within 5 yards of a three-pin grounded power outlet (115 Volts, 60 Hz)

135

1 2 ... 142 143 144 145 146 147 148 149 150 151 152 ... 177 178

No comments

Ricoh MV310E Operator's Manual Page 147