Ricoh XR-M Specifications download pdf (Page 12)

3. Check the LCD panel and look through the viewfinder and make sure that

the viewfinder display is operating. (Fig. 27)

· The shutter speed appears in the viewfinder display.

· The shutter speed flashes in the viewfinder display when the subject is

underexposed or overexposed. Under certain conditions, a subject may be

underexposed even when the slowest shutter speed (i.e., 32 seconds) is set.

"L32" flashes in the viewfinder display. Use a flash unit, the Bulb function,

or simply select a larger aperture (smaller number aperture setting) as

necessary. Likewise, a subject may be overexposed even when the fastest

shutter speed (i.e., 1/2000 th second) is set. "2000" flashes in the viewfinder

display. Use a neutraldensity filter or simply select a smaller aperture (larger

number aperture setting) as necessary. (Fig. 28, 29)

15. M (MANUAL) OPERATION

The camera is set to M (Manual) operation when the following viewfinder

display appears. Note that the viewfinder display may vary slightly according

to the current shutter speed and settings (i.e., AE lock, exposure metering,

flash, bulb, and exposure compensation settings). (Fig. 30) Make sure that "M"

is displayed in the viewfinder display and that the lens aperture is not set to

"P" or "A".

4www.butkus.or g

1. Set the main switch selector to M (Manual). (Fig. 31)

Make sure that the mode dial is set to either Self-timer,

Multi Exposure, Auto Bracketing, Continuous Shooting, or Normal mode.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 43 44

No comments

Ricoh XR-M Specifications Page 12