Ricoh XR-M Specifications download pdf (Page 8)

Lightly press the shutter button to turn on the power and update the LCD

panel. For maximum battery life, always set the mainswitch selector to L

(Lock) when the camera is not used.

10. MONITORING THE CONDITION OF THE BATTERIES

When the main switch selector is set to A (Auto) or M (Manual), the battery

condition is displayed on the LCD panel.

1. Batteries are in good condition when the I symbol appears on the LCD

panel. (Fig. 12)

2. When the batteries are nearly exhausted, the a symbol is displayed on the

LCD panel. (Fig. 13) Replace with four new M-size alkaline batteries.

3. When the batteries are virtually exhausted, the n symbol appears on the

LCD panel. Replace with four new AA-size alkaline batteries. (Fig. 14)

· In extremely cold temperatures, the n symbol may appear on the LCD panel.

(In cold temperatures, the battery voltage is reduced.) You may be able to use

the camera if you remove and warm up the batteries.

11. LOADING THE FILM

Always avoid direct sunlight when loading the film.

1. Press the back cover lock release button and slide the back cover latch down

to open the back cover. (Fig. 15)

4www.butkus.org

2. Load the film cassette into the film chamber and pull out the film leader so

that it extends past the film leader index. (Fig. 16)

· If the film leader is pulled out more than necessary when loading, the total

number of exposures may be reduced.

3. Make sure that the film stays within the film guides, and that the upper

sprocket edge is under the guide plate. (Fig. 17)

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 43 44

No comments

Ricoh XR-M Specifications Page 8