Ricoh PJ X3131 Owner's Manual download pdf (Page 38)

Detailed description

[Screen size]

Normal• : Enlarge an input image to ﬁt the screen without changing the aspect

ratio of video signals.

Full• : Displays an input image in 1024 × 768 dot resolution by enlarging it to

ﬁll the entire screen. (X3131/X3241)

Displays an input image in 1280 x 800 dot resolution by enlarging it to

ﬁll the entire screen. (WX3131)

Thru• :

Displays an input image in the native resolution of the video signals. Thru

display is not available for Y/PB/PR, Video and S-Video-input images.

The larger image than the screen size will be displayed over the

screen. The input image may appear vertically long with some

frequencies of video signals.

Wide

(X3131/

X3241)

• : Displays an input image in the center of the screen with a 16:9 aspect

ratio by enlarging it to ﬁt the width of the screen. The upper and lower

portions of the image will be compressed.

Wide display is not available for Computer-input images.

4:3 zoom

(WX3131)

• : Displays an input image with a 4:3 aspect ratio by enlarging it

vertically. The enlarged image will be displayed over the screen.

4:3 zoom display is not available for computer images.

For Y/PB/PR input, screen size setting function is not available for the video signals

with a 16:9 aspect ratio.

•

Note

If you use the screen size setting function on commercial video software, broadcast

or cable-broadcasting programs to display images with the varying aspect ratio

except for the purpose of your private viewing and listening, it may infringe the

[Up/down shift]

Shifts the projected image vertically when [Screen size] is [Wide] for X3131/X3241.

Shifts the projected image vertically when [Screen size] is [4:3 zoom] for WX3131.

[Blackboard mode]

Projects the image in colors more like projecting on a screen.

Precaution

The projected image may differ depending on the type, color, and material of the

blackboard and wall even if the selected color is the same as the projected screens.

[Background]

RICOH is set for [Logo] by factory setting.

If user’s logo has been registered, it is displayed when [Logo] is set for background.

[Start-up screen]

If user’s logo has been registered and this setting is [On], the logo is displayed at start-up.

[User logo]

Registers a part of the image that is input from computer, as a stationary picture and

displays it as a logo at start-up and when no signal is input.

•

Using the menus (Continued)

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 55 56

Comments to this Manuals

No comments

Ricoh PJ X3131 Owner's Manual Page 38

Comments to this Manuals

Related products and manuals for Projectors Ricoh PJ X3131