Ricoh WG-30 Specifications download pdf (Page 37)

Getting Started

Installing an SD Memory Card

This camera uses SD Memory Cards, SDHC Memory Cards or SDXC Memory

Cards. Captured images are saved on the SD Memory Card if a card is inserted

in the camera. They are saved in the built-in memory if a card is not inserted

(p.37).

• Be sure to use this camera to format (initialize) an SD Memory Card that is

unused or has been previously used on other cameras or digital devices.

Refer to “Formatting the Memory” (p.148) for instructions on formatting

cards.

• Make sure that the camera is turned off before inserting or removing the SD

Memory Card.

• Allow the camera to dry completely before changing the SD Memory Card.

Avoid changing the card where the camera is likely to get wet or dirty, and

make sure that your hands are dry.

• Do not use excessive force when sliding the battery/card cover open and

closed because the waterproof seal may peel off. If the seal is not in the

correct position, the camera will not be waterproof.

• The number of still pictures that can be stored varies depending on the

capacity of the SD Memory Card and the selected number of recorded

pixels and quality level (p.189).

•

The power lamp blinks while the SD Memory Card is being accessed (data

is being recorded or read).

Backing Up Data

The camera may not be able to access data in the built-in memory in the case of a

malfunction. Use a computer or other device to back up important data in another

location.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 203 204

No comments

Ricoh WG-30 Specifications Page 37