Ricoh GX7000 User's Guide download pdf (Page 214)

Status Monitor Errors

an error occurs with the printer, Status Monitor displays an error message. Click [User Guide...] to display

the page corresponding to the error where you can check how to solve the problem in more detail.

Depending on the “Auto Continue” and “Env.Slctr.Alert” settings specified on the System menu, some of

the following messages might not appear.

• See p.147 "Specifying System Settings using the Control Panel (System Menu)"

Status Monitor Does Not Open

If the Status monitor does not open for a shared printer, the following questions should be addressed.

Are the share settings correct?

Check the share settings of the printer. The printer driver must also be installed on the client computer. See

p.71 "Setting Up a Server" and p.72 "Setting Up a Client Computer".

No Response from Printer

Follow the procedure below to check the port settings and the connection between the printer and computer.

1. Check that the power of the printer is on.

2. Make sure that the computer and printer are properly connected using a USB cable.

3. Open the printer properties dialog box.

4. Click the [Ports] tab.

5. Check that USB is selected in the [Print to the following port:] list.

• Under Windows 98/Me, check that USB is selected in the list on the [Details] tab.

• If

you want to connect the printer to the network, check the operating environment, and then change

the port setting. For details about configuring the port, see p.78 "Using the SmartDeviceMonitor for

Client Port", p.80 "Using the Standard TCP/IP Port", and p.81 "Using the LPR Port".

No Paper/Tray Not Detected (Tray 1)

Tray 1 is empty or the paper in it is not loaded properly. Do one of the following:

•

Load the tray.

• Print by Form Feed (Change the tray).

6. Troubleshooting

212

1 2 ... 209 210 211 212 213 214 215 216 217 218 219 ... 271 272

No comments

Ricoh GX7000 User's Guide Page 214