Ricoh AP3800C Operations Instructions download pdf (Page 25)

Replacing the Development Unit

If "Replace Black Dev. Unit(TypeD)"

appears on the panel display, replace

the black Development Unit.

If "Replace Color Dev. Unit(TypeB)"

appears on the panel display, replace

the three color (CMY) Development

Units.

Note

❒ A dustproof filter is attached to the

black Development Unit. When re-

placing the black Development

Unit, also replace the dustproof fil-

ter. See p.24 “Replacing the Dust-

proof Filter”.

❒ When replacing the black Devel-

opment Unit, clean the registration

roller. See p.32 “Cleaning the Reg-

istration Roller”.

Turn off the power switch and

unplug the power cable.

Open the front cover slowly by

pulling down from the two areas

on the left and right.

Take out the green screwdriver.

Use this screwdriver for all attach-

ment and detachment of screws.

Turn the light brown lever coun-

terclockwise.

Loosen two screws that are fasten-

ing the inner cover using provid-

ed screwdriver.

You cannot remove these two

screws.

Replace Black

Dev. Unit(TypeD)

Replace Color

Dev. Unit(TypeB)

ZDJH007J

ZDJH013J

ZDJH014E

ZDJH015J

JupP1k_GB_Mainte_F_FM.book Page 15 Thursday, August 22, 2002 4:23 PM

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 123 124

Comments to this Manuals

No comments

Ricoh AP3800C Operations Instructions Page 25

Comments to this Manuals

Related products and manuals for Print & Scan Ricoh AP3800C