Ricoh Aficio MP 161F Setup Guide Page 103

  • Download
  • Add to my manuals
  • Print
  • Page
    / 122
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 102
Message List
95
2
SMTPC: username or password wasn’t cor-
rect. [response code] (information)
Connection to the SMTP server failed, because
the specified SMTP user name is incorrect, or
the specified SMTP password is incorrect.
Check the SMTP user name and password.
Snmp over IPv4 is ready
Communication over IPv4 with snmp is available.
Snmp over IPv6 is ready.
Communication over IPv6 with snmp is available.
Snmp over ipx is ready.
Communication over IPX with snmp is available.
snmpd start. The snmpd service has started.
started. The direct print service has started.
Started. The bonjour (rendezvous) function is enabled.
terminated. The bonjour (rendezvous) function is disabled.
The print server received error <error number>
during attempt to log in to the network. Access
to the network was denied. Verify that the print
server name and password are correct.
Login to the file server failed. The print server
is not registered or a password is specified.
Register the print server without specifying a
password.
trap account is unavailable. v3Trap cannot be sent. This could be because
the Trap destination account is different from
the account specified by the printer.
usbd is disable.
Plug and Play function and printing is disabled
because usbd is disabled in the security mode.
Enable usbd in the security mode.
WINS name registration: No response to serv-
er<WINS server address>
There was no response from the WINS server.
Check the correct WINS server address is en-
tered. Alternatively, check the WINS server is
functioning properly.
WINS wrong scopeID=<Scope ID> An invalid scope ID was used. Use a valid
scope ID.
wpa authentication Failed WPA authentication failed. Check the WPA
configuration.
wpa authentication started WPA authentication has started.
wpa IEEE802.1X started WPA authentication has started.
wpa connecting to authenticator WPA is connecting to authenticator.
wpa link up WPA key exchange has finished, and commu-
nication has been terminated.
wpa probe response doesn’t have IE. WPA probe response does not have IE.
wpa success authenticated WPA authentication was successful.
wpa success key received WPA key reception was successful.
wpa waiting for key Waiting for WPA key.
wpasupd start wpasupd has started.
wpasupd stop wpasupd has ended.
Message Problem and solutions
Page view 102
1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 121 122

Comments to this Manuals

No comments