Ricoh Aficio MP 161F Setup Guide Page 81

  • Download
  • Add to my manuals
  • Print
  • Page
    / 122
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 80
Remote Maintenance by telnet
73
2
wins
Use the "wins" command to configure
WINS server settings.
Viewing settings
msh> wins
If the IPv4 address obtained
from DHCP differs from the
WINS IPv4 address, the DHCP
address is the valid address.
Configuration
msh> wins “interface_name”
{on | off}
• {on} means "active" and {off}
means "inactive".
Be sure to specify the interface.
wlan can be specified only
when the IEEE 802.11b interface
is installed.
Address configuration
Use the following command to
configure a WINS server IP ad-
dress:
msh> wins “interface_name”
{primary|secondary} “IP
address”
Use the “primary” command to
configure a primary WINS serv-
er IP address.
Use the "secondary" command
to configure a secondary WINS
server IP address.
Do not use “255.255.255.255” as
the IP address.
NBT (NetBIOS over TCP/IP) Scope ID
Selection
You can specify the NBT scope ID.
msh> wins “interface_name”
scope “scope ID”
The scope ID can be entered us-
ing up to 31 alphanumeric char-
acters.
Be sure to specify the interface.
wlan can be specified only
when the IEEE 802.11b interface
is installed.
Interface name
Interface configured
ether Ethernet interface
wlan IEEE 802.11b inter-
face
Interface name
Interface configured
ether Ethernet interface
wlan IEEE 802.11b inter-
face
Page view 80
1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 121 122

Comments to this Manuals

No comments