Camera
Link
2 Mega-
pixel
PoCL
4-M4 Depth 4.0
12
28
10.5
40
14.5
14.5 22
3-M2 Depth 3.0
U1(C Mount Screw)
4-M2 Depth 3.0
47.3
3-M2 Depth 3.0(Both Side)
14.5
22
20
2-M4 Depth 4.0
2-M4 Depth 4.0(Both Side)
22
23
28
12
20
12
13
20
B
A
Pin No. Signal name
IN/
OUT
Voltage
Low voltage High voltage
1 GND IN 0V
2 TRIGGER IN IN 0 to +0.5V +2.5 to +5.0V
3 N.C.
4 N.C.
5
STROBE SIGNAL
OUT OUT 0V +3.3V
6 +12Vdc IN +12Vdc
FV-L200B1
A
B
FV-L200B1 Product specifications
Imager 1/1.8" interline UXGA monochrome progressive CCD
Active picture elements UXGA class: 1620 (H) × 1236 (V)
Cell size 4.4 (H) × 4.4 (V) µm
Vertical frequency
(Frame rate)
15.3164 Hz
Horizontal frequency 19.176 kHz
Pixel frequency 36.8181 MHz
Minimum scene illumination 0.1 lux at F1.2
Sync. System Internal
Video output Digital 8 , 10 or 12 bit Raw Data (Base configuration)
Shutter speed OFF, 1/4 to 1/120,000 sec. (Variable at every H and clock)
Gain 0 to 27 dB
Power supply
Input voltage 12 Vdc ± 10%
Consumption Less than 3.0 W
Dimensions 28 (W) × 28 (H) × 40 (D) mm (excluding the connector)
Lens mount C mount
Weight Approximately 43 g
Operational
environment
Operational
temperature
-5 to 45 deg. C
Storage
temperature
-30 to 65 deg. C
Camera Link connector 3M-made SDR equivalent
Note: If the frame grabber board does not support PoCL, please supply power
(12 Vdc) from a power and input/output signal connector.
A
Input/output signal connector Hirose-made HR10A-7R-6PB equivalent
Trigger signal input can be done in accordance with the camera setting.
Optional connector RICOH FP-CN6PB is supported.
B
Dimensions and rear connector specifications
[Strobe signal output] enables user adjustment of exposure and the timing of light emission
[Supported cameras]
FV-L200B1
,
FV-L030B1
,
FV-G200B1
,
FV-G030B1
There is a strobe signal output (LVCMOS level) function for light emission use.
With this function, it is possible for the user to adjust the camera exposure timing
(delay, time) and light emission timing (delay, time) in accordance with the trigger
input signal received by the camera.
Strobe emission timing
Strobe and exposure timing adjustment possible
Strobe
Trigger signal
CCD exposure
Strobe
Trigger signal
CCD exposure
After
strobe siganal
output setting
Before strobe
signal output
setting
Electronic shutter
Electronic shutter
Camera Link
™
2 Megapixel Camera
High-speed frame rate of 2M:15 fps
Ultra-compact 28 mm×28 mm CCD camera among the smallest
in the industry
Uses PoCL (Power over Camera Link), which has a strong track record
as a high-resolution digital camera interface
Camera contains automatic control functions for gain and shutter
Various trigger modes (pulse width, edge preset trigger) as
standard features
Image processing with a lookup table possible in the camera
M4 screw holes are located on four sides (top, bottom, left, right)
Highly rigid case to increase mounting precision
For the power supply, either PoCL or an external supply possible
2M Camera Link with preprocessing functions
Handles a wide range of inspection uses, such as positioning prior to liquid
crystal glass processing, circuit board mounted device part checks and
mounting inspection, automotive component flaw detection, medicine tablet
inspection, etc.
(Unit: mm)
04
(48 pages)
(2 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals