Ricoh XR-X Specifications download pdf (Page 10)

5. As soon as you close the Back Cover, the film speed appears on LCD

Display Panel for 1—2 seconds. Then the LCD Display Panel will show

the following signs (Fig. 26):

(1) Program mode

(2) Total number of exposures on film roll loaded

(3) DX verification

(4) Shutter SPEED

(5) Film advance mode (C/S)

(6) Film taken up onto Film Take-up Spool

(7) Film advance symbols (these symbols will flash in sequence

toward the right to tell you the film is winding)

(8) Film Cassette loaded symbol

(9) Exposure Counter

* If display shuts off, lightly press Shutter Release Button to

update LCD.

* LCD display data can be verified by checking the information

visible through Film Loaded Window on camera back. (Fig. 27)

6. If the film has not advanced correctly or was not taken up onto the Film Take-up Spool, the Film

Cassette loaded symbol will blink until the film has been loaded correctly. Reload the film by repeating

steps 1 - 5 shown above.

If Non-DX films are loaded in the camera, no LCD warnings will be observed.

(The film ISO speeds must also be set manually. See next section.)

4www.butkus.or g

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 43 44

No comments

Ricoh XR-X Specifications Page 10