Ricoh XR-X Specifications download pdf (Page 18)

16. SELF TIMER PHOTOGRAPHY

The Self-timer is used to include yourself in your pictures and normally

provides a delay of 10 seconds, other times are available and may be

changed as follows:

1. Switch to single exposure mode. (Fig. 49)

* If full display information is not showing, lightly touch the Shutter

Release to make the information reappear.

2. Press and hold the INT Button to display the interval time on the LCD

Display Panel.

3. While keeping the INT Button depressed, press the Up or Down

Button until the desired delay time is displayed on the LCD. (Fig. 50)

The LCD will automatically return to the normal display within seconds

after the INT Button is released, and INT will blink to indicate that a

special delay time has been set.

4. Press the Self-timer Button. The Self-timer Green Indicator lamp will blink and the Self-timer

audible beep (if switched on) will be heard. (Fig. 51)

For the last 3 seconds before the shutter releases, the red lamp (and continuous beep) will warn you

that the shutter will release soon.

5. To cancel the Self-timer after it has been started, press the Self-timer Button again or turn the

Power Switch OFF.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 43 44

No comments

Ricoh XR-X Specifications Page 18