15. REWINDING THE FILM
1. DX coded films will rewind automatically when you reach the
end of the roll.
* Film rewinding is indicated by a series of three dashes flashing
in sequence from right to left, while the Exposure counter is
counting down. (Fig. 46)
2. When the film is fully rewound, the motor stops automatically
and "E" appears on the LCD Display Panel. (Fig. 47) You can now
open the Back Cover to unload the film.
* The Shutter Release is locked when "E" is displayed.
3. If you wish to rewind the film before the end of roll is
reached, push the recessed Manual Rewind Button on the
back of the camera with a pen, etc. for about 2 seconds.
(Fig. 48)
* When the DX symbol does not appear (such as when a rolI
of Non-DX film is in the camera), the camera will usually
sense the end of the roll and rewind the film when it is no
longer able to advance to another frame. If it does not, then
you must rewind the film manually.
Comments to this Manuals