Ricoh FV-G030B1 User Manual download pdf (Page 5)

Camera

Link

300 000

Pixel

PoCL

10.5

14.5

14.5 22

U1(C Mount Screw)

47.3

3-M2 Depth 3.0(Both Side)

14.5

2-M4 Depth 4.0(Both Side)

4-M4 Depth 4.0

4-M2 Depth 3.0

3-M2 Depth 3.0

2-M4 Depth 4.0

Pin No. Signal name

IN/

OUT

Voltage

Low voltage High voltage

1 GND IN 0V

2 TRIGGER IN IN 0 to +0.5V +2.5 to +5.0V

3 N.C.

4 N.C.

STROBE SIGNAL

OUT OUT 0V +3.3V

6 +12Vdc IN +12Vdc

FV-L030B1

Dimensions and rear connector specifications

On a camera with preprocessing functions, it is possible to correct luminance at

all gradients using a lookup table prepared by the user based on subject

characteristics and inspection objectives. This also reduces the burden on the

personal computer CPU and increases processing speed. In addition, the lookup

table can be prepared as a CSV ﬁle and uploaded.

Note: For preprocessing functions see page 7.

User can set luminance at all gradients

Camera Link connector 3M-made SDR equivalent

Note: If the frame grabber board does not support PoCL, please supply power

(12 Vdc) from a power and input/output signal connector.

Input/output signal connector Hirose-made HR10A-7R-6PB equivalent

Trigger signal input can be done in accordance with the camera setting.

Optional connector RICOH FP-CN6PB is supported.

High-speed frame rate of VGA: 90 fps

Ultra-compact 28 mm×28 mm CCD camera among the smallest in the industry

Uses PoCL (Power over Camera Link), which has a strong track record

as a high-resolution digital camera interface

Camera contains automatic control functions for gain and shutter

Various trigger modes (pulse width, edge preset trigger)

as standard features

Image processing with a lookup table possible in the camera

M4 screw holes are located on four sides (top, bottom, left, right)

Highly rigid case to increase mounting precision

For the power supply, either PoCL or an external supply possible

VGA Camera Link with preprocessing functions

Suitable for uses such as component alignment, positioning, simple direction

determination before component processing, taping and mounted device part

presence/absence conﬁrmation, etc.

Camera Link

™

VGA Camera

[Lookup table (gamma curve)] enables luminance settings at all gradients for creation of finely detailed images

FV-L030B1 Product specifications

Imager 1/3" interline VGA monochrome progressive CCD

Active picture elements VGA class: 648 (H) × 494 (V)

Cell size 7.4 (H) × 7.4 (V) µm

Vertical frequency (Frame rate) 31.47 (30fps) / 62.94 (60fps) / 94.784 (90fps) Hz

Horizontal frequency 15.7343 (30fps) / 31.4685 (60fps) / 47.2028 (90fps) kHz

Pixel frequency 12.2727 (30fps) / 24.5454 (60fps) / 36.8181 (90fps) MHz

Minimum scene illumination 0.4 lux at F1.2

Sync. System Internal

Video output Digital 8 , 10 or 12 bit Raw Data (Base configuration)

Shutter speed

OFF, 1/3 to 1/40,000 sec. (Variable at every H and clock) (30fps)

OFF, 1/7 to 1/80,000 sec. (Variable at every H and clock) (60fps)

OFF, 1/11 to 1/120,000 sec. (Variable at every H and clock) (90fps)

Gain 0 to 27 dB

Power supply

Input voltage 12 Vdc ± 10%

Consumption Less than 2.7 W

Dimensions 28 (W) × 28 (H) × 40 (D) mm (excluding the connector)

Lens mount C mount

Weight Approximately 43 g

Operational

environment

Operational

temperature

-5 to 50 deg. C

Storage

temperature

-30 to 65 deg. C

Emphasize high

luminance

Output

luminance

Input

luminance

Emphasize low

luminance

Output

luminance

Input

luminance

Three values

Emphasize a specific

luminance

Output

luminance

Input

luminance

Two values

Emphasize medium

luminance

Output

luminance

Input

luminance

Dimensions and rear connector specifications

[Supported cameras]

FV-L200B1

FV-L030B1

FV-G200B1

FV-G030B1

(Unit: mm)

1 2 3 4 5 6 7 8

Comments to this Manuals

No comments

Ricoh FV-G030B1 User Manual Page 5

Comments to this Manuals

Related products and manuals for Security cameras Ricoh FV-G030B1