Ricoh FV-G030B1 User Manual download pdf (Page 7)

300 000

Pixel

GigE

Vision

10.5

15.5

±0.05

14.5

±0.05

16.8

±0.05

30.2

(55.3)

50.8

4-R3

φ36

−0.05

4-M4 Depth 4

1/4”20UNC(Screw for Tripod)

U1(C Mount Screw)

φ31

Pin No. Signal name IN/OUT Signals Initial output signal

1 GND IN GND

2 I/O-1 OUT +3.3V LVTTL Frame Trigger Wait

3 I/O-2 OUT +3.3V LVTTL Exposure Active

TRIGGER_In-

IN Isolated -

TRIGGER_In+

IN Isolated +

6 POWER IN IN +10.8 to +26.4 Vdc

FV-G030B1

DC iris lens connector M1951(EMUDEN-made) equivalent

Note: For details, see product speciﬁcations.

Input/output signal connector Hirose-made HR10A-7R-6PB equivalent

Power input and input/output signal input can be done.

Optional connector RICOH FP-CN6PB is supported.

RJ45 connector Note: Not PoE type. Power provided separately from

FV-G030B1 Product specifications

Imager 1/3" interline VGA monochrome progressive CCD

Active picture elements VGA class : 648 (H) × 494 (V)

Cell size 7.4 (H) × 7.4 (V) µm

Vertical frequency

(Frame rate)

89.91172 Hz

Horizontal frequency 47.2028 kHz

Pixel frequency 36.818175 MHz

Minimum scene illumination 0.58 lux at F1.2

Sync. System Internal

Video output Digital 8, 10 or 12 bit Raw data GigE Vision

Exposure time

Preset free-run mode: 10 µ seconds to 16,777,216 µ seconds

Preset trigger mode: 10 µ seconds to 16,777,216 µ seconds

Pulse width mode: 10 µ seconds to Unlimited

Gain 0 to 20.4 dB

Gamma

Gamma 1.0 (Factory default) or uploadable gamma table

Power

Input voltage + 10.8 to + 26.4 Vdc

Consumption Less than 5.0 W

Dimensions 35 (W) × 35 (H) × 50.8(D) mm (excluding the connector)

Lens mount C mount

Weight Approximately 120 g

Operational

environment

Temperature

(Min)

Environmental temperature -5 deg.C

Storage

Temperature

(Max)

Environmental temperature 35 deg. C or

camera housing temperature (Top plate): 65 deg. C

Note: Please use the unit under conditions that satisfy at least one of the above criteria.

In cases where the ambient temperature exceeds the above limit, when installing the unit

please take suitable heat dissipation measures so that the upper portion of the case stays

at a temperature of 65˚C or less. Inside this unit, between the case and the electronic

components we have taken thermal resistance measures of as small a size as possible.

As a result, by controlling the case temperature, it is possible to keep the camera’s internal

electronic components within the rated level.

GigE Vision

™

VGA Camera

Preprocessing functions and VGA GigE Vision

for a wide range of uses

Dimensions and rear connector specifications

High-speed frame rate of VGA: 90 fps

High image quality with a CCD global shutter

Various scan modes (full, AOI) as standard features

Various trigger modes (pulse width, edge preset trigger) as

standard features

Supports DC iris lens so also excellent for outdoor monitoring uses

Excellent for industrial uses as it handles a wide voltage range

(10.8 - 26.4 V)

Supports updating of camera firmware via Ethernet

In addition to camera tripod screw holes, M4 screw holes are located

on two sides (top and bottom)

Highly rigid case to increase mounting precision

Handles a wide range of inspections, including monochrome image

measurement, defect checking, etc. Suitable for applications involving

installation in various types of devices that make up a machine vision system.

Camera with preprocessing functions Standard camera

Some image

processing done by

camera

Low

CPU burden

High

CPU burden

All image processing

done by PC

[Preprocessing functions] reduce PC processing burden and increase image processing performance

[Supported cameras]

FV-L200B1

FV-L030B1

FV-G200B1

FV-G030B1

On models with preprocessing functions, the camera itself has the various image

processing functions shown below. Compared to cameras where there is an

intervening board, it is possible to reduce the personal computer CPU burden

and increase the transfer speed.

• [Lookup table] enables ﬁnely detailed image creation See page 6

•

[AGC (auto gain control)] enables automatic gain adjustment in camera

• [Auto electronic shutter control] automatically controls the shutter in response to changes

in subject light intensity

CameraCamera PCPC LensLens

(Unit: mm)

1 2 3 4 5 6 7 8

Comments to this Manuals

No comments

Ricoh FV-G030B1 User Manual Page 7

Comments to this Manuals

Related products and manuals for Security cameras Ricoh FV-G030B1