Ricoh SP C252DN Operations Instructions download pdf (Page 122)

Item Description

Communication Mode Select the mode to connect in.

If the machine will be connected to a wireless router or access point, select

[Infrastructure]. If the machine will be connected to a device equipped with

a wireless LAN directly, select [Ad-Hoc].

Ad-Hoc Channel If [Ad-Hoc] is selected for [Communication Mode], select a channel.

Authentication Select an authentication method.

If [Ad-Hoc] is selected for [Communication Mode], you can select only

[Open System] and [Shared Key].

Encryption Select an encryption method.

If [Ad-Hoc] is selected for [Communication Mode], you can select only

[None] and [WEP].

WPA Passphrase If [WPA2-PSK] or [Mixed Mode WPA/WPA2] is selected for

[Authentication], enter the WPA encryption key.

WEP Key Length If [WEP] is selected for [Encryption], select 64 bits or 128 bits for the length

of the encryption key.

WEP Transmit Key ID Select an ID number to identify each WEP key in case multiple WEP

connections are configured.

WEP Key Format Select a format for entering the WEP key.

WEP Key Enter the WEP key. The number and type of characters you can enter vary

depending on the length and format selected for the key. See the following:

• WEP key length: [64bit], Format: [Hexadecimal]

WEP key max length: 10 characters (0-9, A-F, a-f)

• WEP key length: [64bit], Format: [ASCII]

WEP key max length: 5 characters (0x20-0x7e)

• WEP key length: [128bit], Format: [Hexadecimal]

WEP key max length: 26 characters (0-9, A-F, a-f)

• WEP key length: [128bit], Format: [ASCII]

WEP key max length: 13 characters (0x20-0x7e)

• If you are configuring the connection settings manually, check the SSID, authentication method, or

encryption key of the access point or wireless router in advance.

5. Configuring the Machine Using Web Image Monitor

120

1 2 ... 117 118 119 120 121 122 123 124 125 126 127 ... 135 136

No comments

Ricoh SP C252DN Operations Instructions Page 122