Ricoh SP C252DN Operations Instructions download pdf (Page 124)

Item Description

Status Displays the status of the IPsec policy as "Active" or "Inactive".

To configure IPsec policies, select the desired IPsec policy, and then click [Change] to open the "IPsec

Policy Settings" page. The following settings can be made on the "IPsec Policy Settings" page.

IP Policy Settings

Item Description

No. Specify a number between 1 and 10 for the IPsec policy. The number you

specify will determine the position of the policy in the IPsec Policy List. Policy

searching is performed according to the order of the list. If the number you

specify is already assigned to another policy, the policy you are

configuring will take the number of the earlier policy, and the earlier policy

and any subsequent policies will be renumbered accordingly.

Activity Select whether to enable or disable the policy.

Name Enter the name of the policy. Can contain up to 16 characters.

Address Type Select IPv4 or IPv6 as the type of IP address to be used in IPsec

communication.

Local Address Displays the IP address of this printer.

Remote Address Enter the IPv4 or IPv6 address of the device with which to communicate.

Can contain up to 39 characters.

Prefix Length Enter the prefix length of the Remote Address, using a value between 1 and

128. If this setting is left blank, "32" (IPv4) or "128" (IPv6) will be

automatically selected.

Action Specify how the IP packets are processed from the following:

• [Allow]: IP packets are both sent and received without IPsec applied to

them.

• [Drop]: IP packets are discarded.

• [Require Security]: IPsec is applied to IP packets that are both sent and

received.

If you have selected [Require Security], you must configure [IPsec Settings]

and [IKE Settings].

5. Configuring the Machine Using Web Image Monitor

122

1 2 ... 119 120 121 122 123 124 125 126 127 128 129 ... 135 136

No comments

Ricoh SP C252DN Operations Instructions Page 124