Ricoh SP204SFNW Service Manual download pdf (Page 18)

Installation, Disassembly, and Adjustments

 After installation, maintenance, or adjustment, always check the operation of the machine

to make sure that it is operating normally. This ensures that all shipping materials,

protective materials, wires and tags, metal brackets, etc., removed for installation, have

been removed and that no tools remain inside the machine. This also ensures that all

release interlock switches have been restored to normal operation.

 Never use your fingers to check moving parts causing spurious noise. Never use your

fingers to lubricate moving parts while the machine is operating.

Special Tools

 Use only standard tools approved for machine maintenance.

 For special adjustments, use only the special tools and lubricants described in the service

manual. Using tools incorrectly, or using tools that could damage parts, could damage the

machine or cause injuries.

During Maintenance

General

 Before you begin a maintenance procedure: 1) Switch the machine off, 2) Disconnect the

power plug from the power source, 3) Allow the machine to cool for at least 10 minutes.

 Avoid touching the components inside the machine that are labeled as hot surfaces.

Safety Devices

 Never remove any safety device unless it requires replacement. Always replace safety

devices immediately.

 Never do any procedure that defeats the function of any safety device. Modification or

removal of a safety device (fuse, switch, etc.) could lead to a fire and personal injury.

Always test the operation of the machine to ensure that it is operating normally and safely

after removal and replacement of any safety device.

 For replacements use only the correct fuses or circuit breakers rated for use with the

machine. Using replacement devices not designed for use with the machine could lead to

a fire and personal injuries.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 307 308

No comments

Ricoh SP204SFNW Service Manual Page 18