Ricoh SP204SFNW Service Manual Page 54

  • Download
  • Add to my manuals
  • Print
  • Page
    / 308
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 53
Installation Requirements
SM 2-5 M145/M146/M147/M148/M149/M150/M151
Installation
2.1.8 IMPORTANT FEATURES
Here are some important features you should remember:
The refillable AIO units can be refilled by a service technician up to three times, depending on
usage. This extends the life of OPC drum.
Remaining toner amount is monitored using dot count for FiO, refillable printer, and TiO only.
Before loading paper, the paper size and paper type must be selected on the initial screen
(System Settings) of the smart Organizing Monitor. The same paper size and paper type must
also be selected with the printer driver at the start of a job. A mismatch error will occur if the
paper size/type settings in the Smart Organizing Monitor and the printer driver are not the
same.
The starter AIO (capacity: 1,000 prints for M133, M162, M144, M163, M134, M165, M142,
M166, M135, M141, M143, M167, M168, M191, M169 / 700 prints for M145, M147, M148,
M149, M150, M146, M151, M164) provided with the machine should be installed in the
machine at installation. After the starter AIO runs out of toner, it can be replaced with a new
AIO (capacity: 2,600/1,500 prints). This is especially important for the machines with fax
option; if the
Toner End Option is switched off, customers may not be able to read incoming
fax messages.
Page view 53
1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 307 308

Comments to this Manuals

No comments