Ricoh SP204SFNW Service Manual Page 229

  • Download
  • Add to my manuals
  • Print
  • Page
    / 308
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 228
Service Calls
M145/M146/M147/M148/M149/M150/M151 6-2 SM
There are two important settings on the Service Mode screen of the Smart Organizing
Monitor.
When Fuser SC Detect is switched on, the machine will shut down after the third consecutive
fusing jam error. This setting should remain on for safety.
Also, if a fatal error (fusing related SC code) occurs, the machine cannot be serviced until the
service technician releases the error by clicking [Fuser SC Reset] on the Service Mode
screen.
After correcting the problem that caused the fatal SC code to be issued, the service
technician must execute [Fuser SC Reset] in order to recover full operation of the
machine. Otherwise the machine will continue to issue the same SC code even after
the problem has been corrected.
When an Error Occurs
The machines have different operation panels and components so this affects how each machine
alerts the operator when a problem occurs.
When an error occurs, the alert indicator on the operation panel lights and the machine stops.
A buzzer will sound an alert on the M135, M141, M143, M167, M149, M168, M150, M151, or
M169. Press any key on the operation panel to turn the buzzer off. (This is the fax speaker
that also functions as an error alarm.)
There is no buzzer alert for the M133, M134, M162, M144, M163, M145, M165, M147, M142,
M166, M148, M146, M164, M191 because these machines do not have the fax speaker. The
SC number can be displayed on the Service Mode screen of the Smart Organizing Monitor.
(
page 5-31 "Smart Organizing Monitor Service Mode")
Page view 228
1 2 ... 224 225 226 227 228 229 230 231 232 233 234 ... 307 308

Comments to this Manuals

No comments