Ricoh Aficio SP 5100N User Manual download pdf (Page 108)

Programs supplied on CD

IP address setup

Before using your network print server in your network, you

must set TCP/IP addresses for the print server. You will need

your printer card’s MAC address, IP address, subnet mask, and

gateway address. First, check with your network administrator

for the TCP/IP addresses.

NOTE

: The MAC address is the hardware serial number of the

network printer card. You can check the address by printing

the Network Printer Configuration Page. For printing the page,

refer to your printer user’s guide.

You can set your print server’s IP address via the following

methods:

• Printer control panel: If your printer has a control panel and

the network configuration menu, you can set the IP address

directly from the printer. Refer to your printer user’s guide.

• SetIP program: Go to the

Using SetIP

• Web Image Monitor SP 5100N: Once you have set an IP

address for your network print server, you can use the

embedded web server in the network printer card to change

the address. Go to next column.

• DHCP: You can use Dynamic Host Configuration Protocol

(DHCP) to get an IP address automatically assigned by your

network administrator, if your network system supports this

protocol.

• BOOTP: A network-based server using the BootStrap

protocol (BOOTP) can notify the network printer card of its

assigned IP address each time the printer turns on, if your

network system supports this protocol.

NOTE

: To get an IP address from the DHCP or BOOTP server,

the IP assignment method must be set to DHCP or BOOTP.

Using SetIP

From the Windows Start menu, select

Programs

SP 5100N

SetIP.

The program automatically detects and displays new and

configured print servers on your network.

Select the name of your printer and click . If you

cannot find your printer name, click to refresh the list.

Even with this step, if you cannot find your printer name,

then contact Network Administrator.

Enter your network printer card’s MAC address (hardware

address), IP address, subnet mask, default gateway, and

then click

Apply

Click

to confirm the settings.

Click

Exit

to close the SetIP program.

Using Web Image Monitor SP 5100N

Run your web browser.

Enter your print server’s IP address in the URL field and

click

Click

Network Settings

TCP/IP

Select

Static

from

IP Address Assignment Method

Enter your print server’s TCP/IP addresses and click

Apply

1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 125 126

Comments to this Manuals

No comments

Ricoh Aficio SP 5100N User Manual Page 108

Comments to this Manuals

Related products and manuals for Printers Ricoh Aficio SP 5100N