Ricoh SP 1200S User's Guide download pdf (Page 71)

Troubleshooting and routine maintenance

65

B

d Plug the machine’s power cord back into

the electrical socket first, and then

reconnect all cables. Turn on the

machine’s power switch.

Note

In addition to cleaning the scanner glass

and glass strip with a soft lint-free cloth

moistened with water, run your finger tip

over the glass to see if you can feel

anything on it. If you feel dirt or debris,

clean the glass again concentrating on

that area. You may need to repeat the

cleaning process three or four times. To

test, make a copy after each cleaning.

Cleaning the laser scanner

window B

WARNING

Use neutral detergents.

DO NOT use any flammable substances,

spray or organic solvent/liquids containing

alcohol/ammonia to clean the inside or

outside of the machine. Doing this may

cause a fire or electrical shock. For more

information see Important information

on page 33.

CAUTION

DO NOT touch the laser scanner window

with your fingers.

a Before you clean the inside of the

machine, turn off the machine’s power

switch.

Unplug the power cord from the

electrical socket.

b Open the front cover and slowly take out

the drum unit and toner cartridge

assembly.

WARNING

HOT SURFACE

After you have just used the machine, some

internal parts of the machine will be

extremely hot. To prevent injury, when you

open the front or back cover (back output

tray) of the machine, DO NOT touch the

shaded parts shown in the illustration.

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 102 103

Comments to this Manuals

No comments