Ricoh SP3510SF User Manual Page 194

  • Download
  • Add to my manuals
  • Print
  • Page
    / 476
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 193
5. Enter the length using the number keys, and then press the [OK] key.
To enter a decimal point, press [ ].
You can press the [Escape] key to exit to the previous level of the menu tree.
You can change the machine's default [Scan Size] setting to always scan originals with a specific
scanning size.
Temporary job settings are cleared in the following cases:
When no input is received for the period of time specified in [System Auto Reset Timer] while
the initial screen is displayed.
When the [Clear/Stop] key is pressed while the initial screen is displayed.
When the machine's mode is changed.
When the power is turned off.
When the machine's default for the same setting is changed.
For details about [Scan Size], see p.263 "Scanner Settings".
For details about [System Auto Reset Timer], see p.298 "Administrator Settings".
Adjusting image density
This section describes how to adjust image density for the current job.
There are five image density levels. The higher the density level, the darker the scanned image.
1. Press the [Density] key.
CMF138
2. Press the [ ][ ] keys to select the desired density level, and then press the [OK] key.
Press the [Escape] key to discard the current change and return to the initial screen.
You can change the machine's default [Density] setting to always scan with a specific density level.
5. Using the Scanner Function
192
Page view 193
1 2 ... 189 190 191 192 193 194 195 196 197 198 199 ... 475 476

Comments to this Manuals

No comments