Ricoh SP204SF Operations Instructions Page 180

  • Download
  • Add to my manuals
  • Print
  • Page
    / 204
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 179
Error and Status Indicate on the Control Panel
Messages on the Screen
If the "Service Call: SCXXX" appears, contact your sales or service representative.
Depending on the model you are using, some error messages may not appear.
If the "Engine Over Heat Please Wait" message appears, wait until the message disappears. If the
message appears during printing, the machine stops and resumes printing after the message has
disappeared.
Message Causes Solutions
Tray 1
Out of Paper
Tray 1 has run out of paper.
Load paper into Tray 1. See page 35
"Loading Paper".
Bypass Tray
Out of Paper
The bypass tray has run out of
paper.
Load paper into the bypass tray. See
page 35 "Loading Paper".
Misfeed: Inner/
Outer
A paper jam has occurred in the
machine.
Remove the jammed paper. See page 162
"Paper Feed Problems".
Misfeed: ADF
Open Cov. Rmv.
Paper
An original has been jammed
inside the ADF.
Remove jammed originals, and then
place them again. See page 162
"Paper Feed Problems".
Check the originals are suitable for
scanning. See page 44 "Placing
Originals".
Set Correct Size Ppr
Press Start to Print
The paper for printing fax is not
loaded.
Press the [Start] key to begin printing,
or press the [Stop/Clear] key to
cancel the job.
Load the appropriate size paper.
Cover Open
The front cover or fusing cover is
open.
Close the front cover or fusing cover
completely.
10. Troubleshooting
178
Page view 179
1 2 ... 175 176 177 178 179 180 181 182 183 184 185 ... 203 204

Comments to this Manuals

No comments