2. SERVICE PROGRAM MODE
2.1 SERVICE PROGRAM MODE OPERATION
The service program (SP) mode is used to check electrical data, change
modes, and adjust values.
2.1.1 Service Program Access Procedure
1) How to enter the SP mode
Press the following keys in sequence.
→
→
→
→
Hold the
key for more than 3 seconds.
2) How to exit SP mode
Press the
key or exit key three times.
2.1.2 Accessing Copy Mode from within an SP Mode
1. Press the Interrupt key.
2. Select the appropriate copy mode and make trial copies.
3. To return to the SP mode, press the Interrupt key again.
A193M505.wmf
SERVICE PROGRAM MODE 1 August 1996
4-4
Comments to this Manuals