11.3 ADF IMAGE ADJUSTMENT
11.3.1 Registration and Blank Margin
NOTE:
Make a temporary test chart as shown above using A3/DLT paper.
1. Place the temporary test chart on the ADF and make a copy from one of
the feed stations.
2. Check the registration, and adjust using the following SP modes if
necessary.
SP mode
Side-to-side Registration SP6-006-1
Leading Edge Registration (Simplex) SP6-006-2
Trailing Edge Blank Margin SP6-006-3
11.3.2 Sub Scan Magnification
NOTE:
Make a temporary test chart as shown above using A3/DLT paper.
1. Place the temporary test chart on the ADF and make a copy from one of
the feed stations.
2. Check the registration, and adjust using SP 6-007 if necessary. The
specification is
±
1%.
A193R516.wmf
B
A
A: Leading Edge Registration
B: Side-to-side Registration
A193R515-2.wmf
A
A: Sub scan magnification
A193R526.wmf
1 August 1996 COPY ADJUSTMENT PRINTING/SCANNING
6-43
Comments to this Manuals