2.1.3 How to select the program number
Program numbers are composed of two or three levels.
To input the required program number, select each program level in
sequence.
1. Select the 1st level program number at the numeric key pad and press
the
key or OK key.
NOTE:
The 1st level program number can be selected using the arrow
keys or Prev key or Next key.
2. Select the 2nd level program number at the numeric key and press the
key or OK key.
NOTE:
The 2nd level program number can be selected using the arrow
keys or Prev key or Next key.
3. If there any are third level programs in the SP mode, they can be selected
the same way as the 1st and 2nd level SP modes.
NOTE:
The 3rd level program number can be selected using the arrow
keys or Prev key or Next key.
2.1.4 To Input a Value or Setting for an SP Mode
1. Enter the required program mode as explained above.
2. Enter the required setting using the numeric keys, then press the
key
or OK key.
NOTE:
If you forget to press the
key or OK key, the previous value
remains.
3. Exit SP mode.
A193M506.wmf
1 August 1996 SERVICE PROGRAM MODE
4-5
Comments to this Manuals