Ricoh SP 200 Specifications download pdf (Page 96)

1. INSTALLATION REQUIREMENTS

1.1 ENVIRONMENT

1. Temperature Range: 10

C to 30

C (50

F to 86

2. Humidity Range: 15 % to 90 % RH

3. Ambient Illumination: Less than 1,500 lux (Do not expose to direct

sunlight.)

4. Ventilation: Room air should turn over at least 30

/hr/person

5. Ambient Dust: Less than 0.10 mg/m

(2.7 x 10

-6

oz/yd

)

6. Avoid an area which is exposed to sudden temperature changes. This

includes:

1) Where it will not be directly exposed to cool air from an air conditioner.

2) Where it will not be directly exposed to reflected heat from a heater.

7. Do not place the machine in an area where it will be exposed to corrosive

gasses.

8. Do not install the machine at any location over 2,000 m (6,500 ft.) above

sea level.

9. Place the copier on a strong and level base. (Inclination on any side

should be no more than 5 mm.)

10. Do not place the machine where it may be subjected to strong vibrations.

1.2 MACHINE LEVEL

1. Front to back: Within 5 mm (0.2") of level

2. Right to left: Within 5 mm (0.2") of level

1 August 1996 INSTALLATION REQUIREMENTS

3-1

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 237 238

No comments

Ricoh SP 200 Specifications Page 96