Ricoh 480W Operations Instructions Page 74

  • Download
  • Add to my manuals
  • Print
  • Page
    / 160
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 73
User Tools (System Settings)
62
4
Energy Saver
When no other key operations are performed, the machine switches to low
power mode after a specified period.
Note
Default: 15 minutes
Enter a time interval between 1 and 240 minutes in one minute increments
using the number keys.
Panel Off Timer
Set the amount of time the machine waits before switching the panel off after
copying has finished or the last operation is performed.
Note
Default: On, 1 minute
When selecting [On], enter a time interval between 10 seconds to 240 min-
utes using the number keys.
System Auto Reset
The System Reset setting automatically switches the display to its initial con-
dition when no operations are in progress, or when an interrupted job is
cleared. This setting determines the system reset interval. See p.54 Function
Priority.
Note
Default: On, 60 seconds
The time can be set from 10 to 999 seconds, in one second increments, using
the number keys.
Copier / Document Server Auto Reset Timer
Specifies the time to elapse before copier and Document Server modes reset.
Note
If [Off] is selected, the machine does not automatically switch to the user
code entry screen.
Default: On, 60 seconds
The time can be set from 10 to 999 seconds, in one second increments, using
the number keys.
Scanner Auto Reset Timer
Specifies the time to elapse before the scanner function resets.
Note
If [Off] is selected, the machine does not automatically switch to the user
code entry screen.
Default: On, 60 seconds
The time can be set from 10 to 999 seconds, in one second increments, using
the number keys.
DolphinC2_GBzen_F_pre_FM.book Page 62 Wednesday, February 2, 2005 11:44 AM
Page view 73
1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 159 160

Comments to this Manuals

No comments