Ricoh Printer L4130 User Manual Page 151
- Page / 174
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
Warning / Error Messages
5-17
1
1
1
1
5
Troubleshooting
SYSTEM HALT
Message Cause Solution
There is a slot in which the Eco-car-
tridge has not been inserted more
than a certain time.
Set an Eco-cartridge.
The thermistor connection of a
heater is defective.
Check the thermistor connection of the
drying heater.
Turn off the main power to the
machine and turn it on after a while.
If the same error message appears
again, contact your local distributor to
call for service.
The thermistor is abnormal and the
temperature cannot be read nor-
mally.
Turn off the main power to the
machine and turn it on after a while.
If the same error message appears
again, contact your local distributor to
call for service.
A head heater is disconnected.
The temperature abnormality of the
heater has been detected.
When this error occurred and if the
temperature abnormality cannot be
resolved, the power supply of the
machine is forcibly turned off.
Due to a certain error, the function
cannot be performed.
Return to the local screen, check the
error status and take a countermea-
sure.
There remains received data that
has not yet been printed.
Execute the data clear function.
( P.2-29)
The number of mounted heads is
“0”.
Turn off the main power to the
machine and turn it on after a while.
If the same error message appears
again, contact your local distributor to
call for service.
The media width or the media
length required for printing is not
enough.
Change the media to the one with
enough width or length.
When the media width narrows
because the origin moved, slide the
origin to the right to widen the effective
media width.
The parameter has an error.
Turn off the main power to the
machine and turn it on after a while.
If the same error message appears
again, contact your local distributor to
call for service.
Message Solution
Turn off the main power to the machine and turn it on after a while.
If the same error message appears again, check the number and contact your
local distributor to call for service.
(“000” is the error No.)
ERROR 6 2 7
RE - I NSERT CARTR I DGE
ERROR 7 0 2
THERM I STOR CONNECT
ERROR 7 0 3
! EXT HEATER BRK
ERROR 7 0 7
! H1 HEATER BREAK
ERROR 7 1 0
HEATER TEMP ERROR
ERROR 901
I NVAL I D OPERAT I ON
ERROR 9 0 2
DATA REMA I N
ERROR 9 0 d
NO HEAD SE L ECT
ERROR 9 0 f
PR I NT AREA SHORT
ERROR 0 4
PARAM ROM
SYSTEM HALT
00 0 : MESSAGE
- Operation Manual 1
- TABLE OF CONTENTS 2
- Chapter 2 3
- Basic Operations 3
- Chapter 3 3
- Extended Functions 3
- Chapter 4 4
- Maintenance 4
- Information 6
- DISCLAIMER OF WARRANTY 7
- FCC Statement (USA) 7
- Warning on Class A Product 8
- DECLARATION OF CONFORMITY 9
- Safety Precautions 10
- Warning for Use 11
- Handling of ink 12
- Note on maintenance 12
- CAUTIONS and NOTES 14
- Cautions on Installation 15
- Safety interlock 16
- Warning labels 17
- Chapter 1 19
- Before Use 19
- Moving This Machine 20
- Names of Parts and Functions 21
- Operation Panel 23
- Signs on the power switch 23
- Media sensor 24
- Carriage 25
- Capping station 26
- Connecting Cables 28
- Connecting the power cable 29
- Inserting ink cartridge 30
- Green and Black inks 32
- Changing an ink cartridge 34
- For Ink cartridge lamps 34
- About ink expiration date 34
- Usable sizes of media 36
- Caution in handling of medias 36
- About antistatic sheet 37
- Workflow 40
- Turning the Power ON/OFF 41
- Turning the Power OFF 42
- Setting a Media 43
- Fix the carriage 44
- Close the front cover 44
- Note for media setting 45
- ERROR 516 46
- MED I A SET POS I T I ON R 46
- MED I A SET POS I T I ON L 46
- Pull out the roll media out 48
- INPUT MEDIA LENGTH 50
- Take-up device 51
- Setting leaf media 52
- Notes when using media press 53
- Changing the printing origin 54
- Preparing for the Heaters 55
- Test Feeding 57
- Test Printing 58
- Head Cleaning 60
- Set the media feeding 61
- Printing Data 65
- Starting a Printing Operation 66
- Drying Feed 67
- Cutting a media 68
- List of Functions 72
- Setting Logical Seek 73
- Setting Drying Time 74
- Setting Margins 75
- (P.2-23) is performed, make 76
- Setting Auto Cleaning 77
- Other Settings 79
- Machine Settings 80
- Setting a AUTO Power-off 81
- Convenient use 83
- Setting Time 84
- Setting Units 85
- Setting a KEY BUZZER 86
- Setting a LANGUAGE 87
- Initializing the Settings 88
- Displaying the Information 89
- Cleaning the Media Sensor 96
- Cleaning the Media Holder 96
- Cleaning the Wiper and Cap 97
- At the start of immersion 98
- At the end of immersion 98
- Cap rubber 100
- Cap rubber cover 100
- Routine Maintenance 101
- Press the key in LOCAL 102
- Press the key 102
- • Never rub the nozzles 106
- COMP LETED [ ENT ] 108
- Close cover 108
- Washing of Head nozzle 109
- Washing nozzle surface 112
- Head No.: H1 to H2 114
- Nozzle line 114
- Reset the set value 116
- (1) Press the key in LOCAL 118
- (4) Press the key 118
- Replacing consumables 120
- Confirmation Message in LOCAL 121
- Replacing the Cutter Blade 124
- Replace the white ink filter 128
- Fill up the white ink 128
- Filling the white ink 130
- Chapter 5 135
- Troubleshooting 135
- Image quality is poor 138
- Nozzle is clogged 139
- Ink cartridge warning appears 139
- When Error 618 to 61b occur 140
- Warning / Error Messages 145
- Message Cause Solution 146
- Ink Error 147
- Error messages 148
- HDC POSCNT 150
- L-SCALE BLACK 150
- SYSTEM HALT 151
- Chapter 6 153
- Appendix 153
- Specifications 154
- Ink specifications 155
- List of consumables 156
- Sheet for inquiry 157
- Function Flowchart 158
- From P.6-6 160
- -9999 to 9999 161
- MAINTENANCE 162
- MACHINE SET 162
- To P.6-14 164
- From P.6-12 166
- 90 to 600 sec 167
- 10 to 90 min 167
- STATION MAINT. / HEAD MAINT 168
- OFF / 1 to 320 169
- Lv.1, Lv.2, Lv.3 170
- MMCC _ _ _ _, _ _ _ _ YYKK 170
- NORMAL / SOFT / HARD 171
Related products and manuals for Print & Scan Ricoh Printer L4130
Print & Scan Ricoh Aficio AP4510 User Manual
(66 pages)
(66 pages)
Print & Scan Ricoh LD117F User Manual
(6 pages)
(6 pages)
Print & Scan Ricoh LDD250 User Manual
(4 pages)
(4 pages)
Print & Scan Ricoh 2045 User Manual
(8 pages)
(8 pages)
Print & Scan Ricoh DSm716 User Manual
(6 pages)
(6 pages)
Print & Scan Ricoh DSC224 User Manual
(6 pages)
(6 pages)
Print & Scan Ricoh Aficio AP400N Setup Guide
(19 pages)
(19 pages)
Print & Scan Ricoh AP4510 Setup Guide
(66 pages)
(66 pages)
Print & Scan Ricoh CL1000N User Manual
(22 pages)
(22 pages)
Print & Scan Ricoh PRO 1357EX User Manual
(12 pages)
(12 pages)
Print & Scan Ricoh AP305 Operations Instructions
(156 pages)
(156 pages)
© 2020, manymanuals.com. All rights reserved. | 0.141 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals