Ricoh Printer L4130 User Manual Page 97
- Page / 174
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
4-5
1
1
1
4
Routine Maintenance
Maintaining the Capping Station
Maintain the ink cap, wiper, etc. located in the capping station. (SATION MAINT.)
The ink cap and wiper function as follows.
• Wiper : It wipes off ink sticking to the head nozzles.
• Ink cap : It prevents the head nozzles from clogging due to dryness.
As the machine is used repeatedly, the wiper and ink cap gradually become dirty with ink, dust, etc.
If nozzle missing cannot be corrected even after head cleaning ( P.2-22) has been performed, Clean this
machine using the cleaning supplies that are recommended by this company.
Cleaning the Wiper and Cap
Ink, dust, or paper waste is pooled on the wiper. To keep stable printing quality, wash the wiper and cap at the
end of the day.
1
Press the key in LOCAL.
2
Press the key.
3
Press to select [STATION MAINT.].
• To keep the nozzle status normal, perform wiper cleaning
frequently.
• The right message is displayed periodically in LOCAL. When
you press the key, it moves to cleaning function.
Tools required for Maintenance
• Maintenance kit • Gloves
• Clean stick • Goggles
• Be sure to wear the supplied goggles and gloves when maintaining the capping
station.Otherwise, you may get ink in your eyes.
• Do not move the carriage out of the capping station by hand.When it is desirable to move the
carriage, press the key to execute the carriage-out. ( P.4-5Steps 1 to 2)
• Further, in the cases as explained below, replace the wiper with the new one.( P.4-28)
Even if you clean the wiper enough, nozzle clogging etc. occurs frequently
When the wiper is deformed
When the stuck ink can not be wiped off
When the warning for wiper replacement is indicated
• When cleaning the wiper, be careful that lint from the clean stick or kimwipe® does not get left on the
wiper.Remaining lint may cause image quality to deteriorate.
• Clean the wiper completely until the stained ink on the top
edge of the wiper film is washed away after soaking the wiper
in the Cleaning Fluid for 1-24 hours. It is recommended to
prepare two or more wipers and use them alternately.
• If cleaning of the wiper is not enough, it may cause nozzle
clogging.
• Do not wash the wiper with other than the Kimwipe®.
Otherwise, lint may remain on the wiper.
WI PER CLEAN I NG
[MNT]
MAINT.
MAINT.
Reference for cleaning
Top edge of the film
CARR I AGE OUT
[ENT]
MAINT.
MOV E PO S I T I ON
:STATION MAINT.
MOV E PO S I T I ON
:STATION MAINT.
- Operation Manual 1
- TABLE OF CONTENTS 2
- Chapter 2 3
- Basic Operations 3
- Chapter 3 3
- Extended Functions 3
- Chapter 4 4
- Maintenance 4
- Information 6
- DISCLAIMER OF WARRANTY 7
- FCC Statement (USA) 7
- Warning on Class A Product 8
- DECLARATION OF CONFORMITY 9
- Safety Precautions 10
- Warning for Use 11
- Handling of ink 12
- Note on maintenance 12
- CAUTIONS and NOTES 14
- Cautions on Installation 15
- Safety interlock 16
- Warning labels 17
- Chapter 1 19
- Before Use 19
- Moving This Machine 20
- Names of Parts and Functions 21
- Operation Panel 23
- Signs on the power switch 23
- Media sensor 24
- Carriage 25
- Capping station 26
- Connecting Cables 28
- Connecting the power cable 29
- Inserting ink cartridge 30
- Green and Black inks 32
- Changing an ink cartridge 34
- For Ink cartridge lamps 34
- About ink expiration date 34
- Usable sizes of media 36
- Caution in handling of medias 36
- About antistatic sheet 37
- Workflow 40
- Turning the Power ON/OFF 41
- Turning the Power OFF 42
- Setting a Media 43
- Fix the carriage 44
- Close the front cover 44
- Note for media setting 45
- ERROR 516 46
- MED I A SET POS I T I ON R 46
- MED I A SET POS I T I ON L 46
- Pull out the roll media out 48
- INPUT MEDIA LENGTH 50
- Take-up device 51
- Setting leaf media 52
- Notes when using media press 53
- Changing the printing origin 54
- Preparing for the Heaters 55
- Test Feeding 57
- Test Printing 58
- Head Cleaning 60
- Set the media feeding 61
- Printing Data 65
- Starting a Printing Operation 66
- Drying Feed 67
- Cutting a media 68
- List of Functions 72
- Setting Logical Seek 73
- Setting Drying Time 74
- Setting Margins 75
- (P.2-23) is performed, make 76
- Setting Auto Cleaning 77
- Other Settings 79
- Machine Settings 80
- Setting a AUTO Power-off 81
- Convenient use 83
- Setting Time 84
- Setting Units 85
- Setting a KEY BUZZER 86
- Setting a LANGUAGE 87
- Initializing the Settings 88
- Displaying the Information 89
- Cleaning the Media Sensor 96
- Cleaning the Media Holder 96
- Cleaning the Wiper and Cap 97
- At the start of immersion 98
- At the end of immersion 98
- Cap rubber 100
- Cap rubber cover 100
- Routine Maintenance 101
- Press the key in LOCAL 102
- Press the key 102
- • Never rub the nozzles 106
- COMP LETED [ ENT ] 108
- Close cover 108
- Washing of Head nozzle 109
- Washing nozzle surface 112
- Head No.: H1 to H2 114
- Nozzle line 114
- Reset the set value 116
- (1) Press the key in LOCAL 118
- (4) Press the key 118
- Replacing consumables 120
- Confirmation Message in LOCAL 121
- Replacing the Cutter Blade 124
- Replace the white ink filter 128
- Fill up the white ink 128
- Filling the white ink 130
- Chapter 5 135
- Troubleshooting 135
- Image quality is poor 138
- Nozzle is clogged 139
- Ink cartridge warning appears 139
- When Error 618 to 61b occur 140
- Warning / Error Messages 145
- Message Cause Solution 146
- Ink Error 147
- Error messages 148
- HDC POSCNT 150
- L-SCALE BLACK 150
- SYSTEM HALT 151
- Chapter 6 153
- Appendix 153
- Specifications 154
- Ink specifications 155
- List of consumables 156
- Sheet for inquiry 157
- Function Flowchart 158
- From P.6-6 160
- -9999 to 9999 161
- MAINTENANCE 162
- MACHINE SET 162
- To P.6-14 164
- From P.6-12 166
- 90 to 600 sec 167
- 10 to 90 min 167
- STATION MAINT. / HEAD MAINT 168
- OFF / 1 to 320 169
- Lv.1, Lv.2, Lv.3 170
- MMCC _ _ _ _, _ _ _ _ YYKK 170
- NORMAL / SOFT / HARD 171
Related products and manuals for Print & Scan Ricoh Printer L4130
Print & Scan Ricoh Aficio AP4510 User Manual
(66 pages)
(66 pages)
Print & Scan Ricoh LD117F User Manual
(6 pages)
(6 pages)
Print & Scan Ricoh LDD250 User Manual
(4 pages)
(4 pages)
Print & Scan Ricoh 2045 User Manual
(8 pages)
(8 pages)
Print & Scan Ricoh DSm716 User Manual
(6 pages)
(6 pages)
Print & Scan Ricoh DSC224 User Manual
(6 pages)
(6 pages)
Print & Scan Ricoh Aficio AP400N Setup Guide
(19 pages)
(19 pages)
Print & Scan Ricoh AP4510 Setup Guide
(66 pages)
(66 pages)
Print & Scan Ricoh CL1000N User Manual
(22 pages)
(22 pages)
Print & Scan Ricoh PRO 1357EX User Manual
(12 pages)
(12 pages)
Print & Scan Ricoh AP305 Operations Instructions
(156 pages)
(156 pages)
© 2020, manymanuals.com. All rights reserved. | 0.231 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals