Ricoh Printer L4130 User Manual Page 98
- Page / 174
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
4-6
4
Press the key.
• The carriage moves to the maintenance position.
• If the carriage is not covered by the ink cap for a long period
of time, the nozzle face of the head may get dry and clogged,
resulting in white lines being left in the printed image.
• The buzzer sounds periodically while the carriage is out of the
capping station. The buzzer sounds at shorter interval when
the print heater temperature is high.
5
Open the right maintenance cover cover then
remove the wiper.
• Pull out the wiper by holding the protrusions at its both ends.
6
Put the wiper that you used for one day into a provided case or solvent-resistance-
covered-container (glass, earthenware, etc.) and pour Cleaning Fluid.
• Time to immerse the wiper shall be for 1 to 24 hours.
7
Take out the wiper and remove ink blot etc. with a
Kimwipe®.
• Wipe off well so that any lint etc. do not remain on the top
edge of the wiper film.
• If you leave the wiper immersed in Cleaning Fluid too long, the wiper may be deformed.
• Dispose the Cleaning Fluid for soaking the wiper if it gets dirty. (As a guide, replace it in a
week). Regarding disposal of unused Cleaning Fluid, please ask Industrial waste disposer
and pursuant to the regulations of your district.
• For case for immersing the wiper, please use provided case or solvent-resistance-covered-
container. In case that you want to immerse the wiper by using your resin case, please
make sure to test whether there are no problems such as case deformation before you try.
Carriage
Projection
At the start of immersion
At the end of immersion
- Operation Manual 1
- TABLE OF CONTENTS 2
- Chapter 2 3
- Basic Operations 3
- Chapter 3 3
- Extended Functions 3
- Chapter 4 4
- Maintenance 4
- Information 6
- DISCLAIMER OF WARRANTY 7
- FCC Statement (USA) 7
- Warning on Class A Product 8
- DECLARATION OF CONFORMITY 9
- Safety Precautions 10
- Warning for Use 11
- Handling of ink 12
- Note on maintenance 12
- CAUTIONS and NOTES 14
- Cautions on Installation 15
- Safety interlock 16
- Warning labels 17
- Chapter 1 19
- Before Use 19
- Moving This Machine 20
- Names of Parts and Functions 21
- Operation Panel 23
- Signs on the power switch 23
- Media sensor 24
- Carriage 25
- Capping station 26
- Connecting Cables 28
- Connecting the power cable 29
- Inserting ink cartridge 30
- Green and Black inks 32
- Changing an ink cartridge 34
- For Ink cartridge lamps 34
- About ink expiration date 34
- Usable sizes of media 36
- Caution in handling of medias 36
- About antistatic sheet 37
- Workflow 40
- Turning the Power ON/OFF 41
- Turning the Power OFF 42
- Setting a Media 43
- Fix the carriage 44
- Close the front cover 44
- Note for media setting 45
- ERROR 516 46
- MED I A SET POS I T I ON R 46
- MED I A SET POS I T I ON L 46
- Pull out the roll media out 48
- INPUT MEDIA LENGTH 50
- Take-up device 51
- Setting leaf media 52
- Notes when using media press 53
- Changing the printing origin 54
- Preparing for the Heaters 55
- Test Feeding 57
- Test Printing 58
- Head Cleaning 60
- Set the media feeding 61
- Printing Data 65
- Starting a Printing Operation 66
- Drying Feed 67
- Cutting a media 68
- List of Functions 72
- Setting Logical Seek 73
- Setting Drying Time 74
- Setting Margins 75
- (P.2-23) is performed, make 76
- Setting Auto Cleaning 77
- Other Settings 79
- Machine Settings 80
- Setting a AUTO Power-off 81
- Convenient use 83
- Setting Time 84
- Setting Units 85
- Setting a KEY BUZZER 86
- Setting a LANGUAGE 87
- Initializing the Settings 88
- Displaying the Information 89
- Cleaning the Media Sensor 96
- Cleaning the Media Holder 96
- Cleaning the Wiper and Cap 97
- At the start of immersion 98
- At the end of immersion 98
- Cap rubber 100
- Cap rubber cover 100
- Routine Maintenance 101
- Press the key in LOCAL 102
- Press the key 102
- • Never rub the nozzles 106
- COMP LETED [ ENT ] 108
- Close cover 108
- Washing of Head nozzle 109
- Washing nozzle surface 112
- Head No.: H1 to H2 114
- Nozzle line 114
- Reset the set value 116
- (1) Press the key in LOCAL 118
- (4) Press the key 118
- Replacing consumables 120
- Confirmation Message in LOCAL 121
- Replacing the Cutter Blade 124
- Replace the white ink filter 128
- Fill up the white ink 128
- Filling the white ink 130
- Chapter 5 135
- Troubleshooting 135
- Image quality is poor 138
- Nozzle is clogged 139
- Ink cartridge warning appears 139
- When Error 618 to 61b occur 140
- Warning / Error Messages 145
- Message Cause Solution 146
- Ink Error 147
- Error messages 148
- HDC POSCNT 150
- L-SCALE BLACK 150
- SYSTEM HALT 151
- Chapter 6 153
- Appendix 153
- Specifications 154
- Ink specifications 155
- List of consumables 156
- Sheet for inquiry 157
- Function Flowchart 158
- From P.6-6 160
- -9999 to 9999 161
- MAINTENANCE 162
- MACHINE SET 162
- To P.6-14 164
- From P.6-12 166
- 90 to 600 sec 167
- 10 to 90 min 167
- STATION MAINT. / HEAD MAINT 168
- OFF / 1 to 320 169
- Lv.1, Lv.2, Lv.3 170
- MMCC _ _ _ _, _ _ _ _ YYKK 170
- NORMAL / SOFT / HARD 171
Related products and manuals for Print & Scan Ricoh Printer L4130
Print & Scan Ricoh Aficio AP4510 User Manual
(66 pages)
(66 pages)
Print & Scan Ricoh LD117F User Manual
(6 pages)
(6 pages)
Print & Scan Ricoh LDD250 User Manual
(4 pages)
(4 pages)
Print & Scan Ricoh 2045 User Manual
(8 pages)
(8 pages)
Print & Scan Ricoh DSm716 User Manual
(6 pages)
(6 pages)
Print & Scan Ricoh DSC224 User Manual
(6 pages)
(6 pages)
Print & Scan Ricoh Aficio AP400N Setup Guide
(19 pages)
(19 pages)
Print & Scan Ricoh AP4510 Setup Guide
(66 pages)
(66 pages)
Print & Scan Ricoh CL1000N User Manual
(22 pages)
(22 pages)
Print & Scan Ricoh PRO 1357EX User Manual
(12 pages)
(12 pages)
Print & Scan Ricoh AP305 Operations Instructions
(156 pages)
(156 pages)
© 2020, manymanuals.com. All rights reserved. | 0.134 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals