Ricoh 4016 Series User Manual download pdf (Page 52)

OPYING

4.5

OTE

Make sure that no other documents are in the ADF. If a

document is detected in the ADF, this document has the priority

rather than the document on the scan glass.

Close the scanner cover.

OTES

• Leaving the cover open while copying will affect the copy quality

and toner consumption.

• If you are copying a page from a book or magazine, close the

cover flat. The slanted cover may cause heavy exposure of the

light when scanning.

Users should verify that the machine is in the Copy mode. If

necessary, press Mode/Enter to change the mode to Copy

mode. In Copy mode, the LCD display shows:

Note that you cannot make copies in Fax mode. The

machine will sounds an error beep.

Make sure that you have selected the required paper tray.

See page 4.2.

Customise the copy settings including the number of copies,

copy size, contrast and image type using the control panel

buttons. See “Setting Copy Options” on page 4.6.

To clear the settings, use the Clear/Stop button.

If necessary, you can use special copy features, such as

Auto Fit and Clone.

Press Start to begin copying. The display shows the copy

processing.

OTES

• You can cancel a copy job while it is copying by Press the

Clear/

Stop

button.

• Dust on the document scanner glass may cause black spots on

the printout, so always keep it clean.

Copy size

Number of copies

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 191 192

No comments

Ricoh 4016 Series User Manual Page 52