Error Messages
M001 4-24 SM
1st/2nd Message Problem/Solution
Hardware Problem, Ethernet
Machine detected an Ethernet error.
Replace controller board.
Hardware Problem, HDD
Machine identified a HDD Board error.
Replace HDD board.
Hardware Problem, Option RAM
Machine detected an optional RAM error.
Replace optional RAM.
Hardware Problem, Parallel I/F
Machine failed self-diagnostic test due to a loop back
error.
If parallel I/F is in use, replace the IEEE1284
interface board.
Hardware Problem, Printer Font
Problem with machine font file.
Replace print module.
Hardware Problem, USB
Machine detected a USB I/F board error.
Replace the USB I/F board.
Hardware Problem, Wireless
Board
Access to the IEEE 802.11 a/g board was possible,
but an error has been detected.
Machine can access IEEE802.11 a/g board but an
error was detected.
Confirm that the board is installed correctly.
Hardware Problem, Wireless
Card
Machine failed to access IEEE 802.11a/g board.
Confirm that the board is installed correctly.
Invalid Data, Power Off On
Machine has received spurious data.
Turn the printer off/on.
Invalid Password, Try again
The invalid password was entered and Locked Print
or Saved File Print is not applicable.
Invalid password entered, Locked Print or Saved File
Print cannot apply.
Printer displays this message for 4 sec., then returns
Rev. 11/03/2009
Comments to this Manuals