Service Call Conditions
M001 4-10 SM
821
D
Self-diagnostic error 2: ASIC
The ASIC provides the central point
for the control of bus arbitration for
CPU access, for option bus and
SDRAM access, for SDRAM refresh,
and for management of the internal
bus gate.
ASIC (controller board
defective)
For more details about this SC code error, execute SP5990 to print an SMC report so you
can read the error code. The error code is not displayed on the operation panel.
822 B Self-diagnostic error 3: HDD
3003
Check performed when HDD is
installed:
HDD device busy for over 31 s.
After a diagnostic command is set for
Sthe HDD, but the device remains
busy for over 6 s.
A diagnostic command is issued to the
HDD device but the result is an erro
HDD defective
HDD harness
disconnected,
defective
Controller board
defective
3004
No response to the self-diagnostic
command from the ASIC to the HDDs
HDD defective
823 B
Self-diagnostic Error: NIC
Network interface board defective
Controller board defective
The network interface board
returned an error during the
self-diagnostic test.
Rev. 11/03/2009
Comments to this Manuals