Ricoh Aficio SP4210N Service Manual Page 93
- Page / 322
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
Service Call Conditions
SM 4-15 M001
Trouble-
shooting
859 HDD Encryption unit error
A serious error occurs when the
HDD data is encrypted to update
an encryption key with the HDD
encryption unit..
• The HDD is not correctly installed.
• No HDD installed
• Unformatted HDD
• The encryption key on the controller is
different from the one on the HDD
• Power failure during the data
encryption
1. Install the HDD correctly.
2. Initialize the HDD.
860 B
HDD startup error at main power on
HDD is connected but a driver
error is detected.
The driver does not respond with
the status of the HDD within 30 s.
HDD is not initialized
Level data is corrupted
HDD is defective
861 D
HDD re-try failure
At power on the HDD was
detected. Power supply to the
HDD was interrupted after the
system entered the energy save
mode, but after the HDD was
awakened from the energy save
mode it did not return to the
ready status within 30 sec.
Harness between HDD and
controller board disconnected,
defective
HDD power connector disconnected
HDD defective
Controller board defective
⇒
Rev. 11/03/2009
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA
- SERVICE MANUAL 1
- CÓPIA NÃO CONTROLADA 10
- DOCUMENTATION HISTORY 11
- TABLE OF CONTENTS 13
- M001 ii SM 14
- TROUBLESHOOTING 15
- DETAILED DESCRIPTIONS 16
- SM v M001 17
- SPECIFICATIONS 18
- Read This First 21
- Caution Labels 23
- Conventions and Trademarks 24
- Trademarks 25
- INSTALLATION 27
- 1. INSTALLATION 29
- 1.1.2 MACHINE LEVEL 30
- 1.1.3 REQUIRED SPACE 30
- 1.1.4 POWER SUPPLY 31
- 1.2 MACHINE INSTALLATION 32
- PREVENTIVE MAINTENANCE 35
- 2. PREVENTIVE MAINTENANCE 37
- 2.2 SERVICE MAINTENANCE 38
- REPLACEMENT & ADJUSTMENT 41
- 3.1 GENERAL 43
- 3.2 SPECIAL TOOLS 45
- 3.3 COVERS 46
- 3.3.2 LEFT COVER 47
- 3.3.3 BY-PASS TRAY UNIT 48
- 3.3.4 FRONT COVER 48
- 3.3.5 RIGHT COVER 49
- 3.4 LASER UNIT 50
- 3.4.4 LASER UNIT 53
- 3.4.5 LASER DIODE UNIT 54
- 3.5 TRANSFER ROLLER 56
- 3.6 TONER END SENSOR 57
- 3.7 FUSING 58
- 3.7.3 PRESSURE ROLLER 61
- 3.7.5 HOT ROLLER STRIPPERS 63
- 3.8 PAPER FEED 64
- 3.8.2 FRICTION PAD 65
- 3.9 BY-PASS TRAY 66
- 3.11 ENGINE BOARD 68
- 3.12 MAIN MOTOR 69
- 3.13 CLUTCHES 70
- 3.14 PSU, HVPS 73
- 3.15 FANS 75
- 3.15.2 PSU FAN 76
- 4. TROUBLESHOOTING 79
- 4.1.2 SC CODE DESCRIPTIONS 80
- 4.2 ERROR MESSAGES 100
- 4.3 GENERAL TROUBLESHOOTING 107
- 4.3.2 ELECTRICAL DEFECTS 108
- 4.3.3 SKEW ADJUSTMENT 111
- 4.3.5 MISCELLANEOUS PROBLEMS 113
- SERVICE TABLES 115
- 5. SERVICE TABLES 117
- Setting a Service Program 118
- Exiting Service Mode 118
- 5.3.1 SERVICE MODE TABLE 124
- SP2-xxx: Drum 128
- SP3-xxx: Process 130
- SP5-xxx: Mode 132
- SP7-xxx: Data Log 175
- SP8XXX: Data Log 2 190
- 5.4 FIRMWARE UPDATE 202
- 5.4.2 PRECAUTIONS 203
- 5.5.1 UPLOADING NVRAM DATA 206
- 5.6.1 OVERVIEW 210
- 5.6.2 MOVE EXEC 211
- 5.6.3 UNDO EXEC 212
- 5.8 MENU MODE 214
- 5.10 CARD SAVE FUNCTION 221
- 5.10.2 PROCEDURE 222
- Error Messages 223
- 5.10.3 ERROR MESSAGES 224
- 6. DETAILED DESCRIPTIONS 227
- 6.1.2 PAPER PATH 228
- 6.2 BOARD STRUCTURE 229
- 6.2.2 CONTROLLER BOARD 230
- 6.3 PRINTING PROCESS 231
- 6.3.2 LASER EXPOSURE 232
- LD Safety Mechanisms 234
- 6.3.3 CARTRIDGE OVERVIEW 236
- 6.3.4 DRUM CHARGE 237
- 6.3.5 DEVELOPMENT 238
- Toner Density Control 239
- 6.3.6 TONER END DETECTION 241
- Main Motor Rotation Count 242
- Toner Overflow Prevention 242
- Summary 244
- 6.4 PAPER FEED 246
- 6.4.2 PAPER TRAY 248
- Paper Lift 249
- Paper Size Detection 251
- Paper End Detection 252
- Remaining Paper Detection 253
- 6.4.3 BY-PASS TRAY 254
- 6.5.1 OVERVIEW 255
- 6.5.2 FUSING DRIVE 256
- 6.5.4 PRESSURE ROLLER 257
- Overheat Protection 260
- 6.5.7 PAPER EXIT 261
- 6.5.8 ENERGY SAVER MODE 262
- 6.6 CONTROLLER FUNCTIONS 263
- 7. SPECIFICATIONS 267
- 7.1.2 EXTERNAL OPTIONS 270
- 7.1.3 PAPER SIZES 271
- Envelopes 274
- 7.1.4 OPERATING ENVIRONMENT 275
- 7.2.1 CONTROLLER BOARD 277
- 7.2.2 PRINTING FUNCTIONS 278
- 7.2.3 PRINTER DRIVERS 279
- 7.2.4 SUPPORTED ENVIRONMENTS 282
- Mac OS Environments 283
- UNIX Environment 284
- Novell Netware 284
- SAP R/3 Environment 285
- 7.2.6 SUPPORTED UTILITIES 288
- 7.3 MACHINE CONFIGURATION 289
- DUPLEX UNIT AD1000 291
- 1.1 COVERS 295
- G893 2 SM 296
- 1.3 INVERTER MOTOR 297
- 2. DETAILED DESCRIPTIONS 298
- 2.1.2 DRIVE COMPONENTS 299
- 2.1.3 ELECTRICAL COMPONENTS 299
- G893 6 SM 300
- 2.2 DUPLEXING 301
- Duplexing 303
- 2.3 SAFETY FUSE 304
- & 305
- G894 PAPER FEED UNIT TK1030 305
- G894/G362 307
- 1.1 PAPER FEED UNIT 309
- 1.2 PAPER FEED ROLLER 310
- 1.3 FRICTION PAD 311
- 1.5 PAPER TRAY BOARD 313
- 1.6 PAPER SIZE SWITCH 314
- 2.3 PAPER LIFT 317
- 2.4 PAPER END DETECTION 318
- 2.6 PAPER SIZE DETECTION 320
- 2.7 SAFETY FUSE 321
- 3. ENVELOPE FEEDER 322
Related products and manuals for Print & Scan Ricoh Aficio SP4210N
Print & Scan Ricoh SP C250DN User Manual
(20 pages)
(20 pages)
Print & Scan Ricoh Pro C651EX Specifications
(81 pages)
(81 pages)
Print & Scan Ricoh C267 User Manual
(21 pages)
(21 pages)
Print & Scan Ricoh N905306 User's Guide
(24 pages)
(24 pages)
Print & Scan Ricoh VT1730 Service Manual
(332 pages)
(332 pages)
Print & Scan Ricoh Aficio BP20N User's Guide
(45 pages)
(45 pages)
Print & Scan Ricoh DDP92 Specifications
(182 pages)
(182 pages)
Print & Scan Ricoh CP6346 User Manual
(6 pages)
(6 pages)
Print & Scan Ricoh LDD735 Service Manual
(153 pages)
(153 pages)
Print & Scan Ricoh SP 200 Specifications
(238 pages)
(238 pages)
Print & Scan Ricoh LD050B User Manual
(8 pages)
(8 pages)
Print & Scan Ricoh D012 User Manual
(25 pages)
(25 pages)
Print & Scan Ricoh SP 1210N User's Guide
(129 pages)
(129 pages)
© 2020, manymanuals.com. All rights reserved. | 0.321 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals