Ricoh SP 311SFN User's Guide download pdf (Page 227)

Problem Solution

The toner is powdery and comes

away from the paper, or the printed

image has a matt appearance.

Check if the levers for printing on envelopes inside the rear

cover are properly set. Pull up the levers.

Printed envelopes come out creased.

Check if the levers for printing on envelopes inside the rear

cover are properly set. Lower the levers.

Documents are not printed properly

when using a certain application, or

image data is not printed properly.

Some characters are printed faintly

or not printed.

Change the print quality settings.

Print Positions Do Not Match Display Positions

If the position of items on the printed page differs from the position displayed on the computer screen,

the cause may be one of the following.

Possible Cause Solution

Page layout settings have not been configured.

Check that the page layout settings are properly

configured in the application.

The paper size setting does not match the paper

loaded.

Make sure the paper size selected in the printer

properties dialog box matches the size of the

paper loaded. For details, see the printer driver

Help.

The printable area has been changed.

Set the printable area to maximum. For details, see

the printer driver Help.

• If the position of items on the printed page differs slightly from the position displayed on the

computer screen even after performing the above procedures, you can adjust the printing position

of each tray in the range of -1.5 to +1.5 mm.

Printer Problems

225

1 2 ... 222 223 224 225 226 227 228 229 230 231 232 ... 271 272

No comments

Ricoh SP 311SFN User's Guide Page 227