Scanner Disassemble Procedure
M085/M086 4-58 SM
4.8.4 PANEL PCB ASSY
1. Release the Hook [A] to remove the Panel PCB ASSY [B] from the Panel unit [C].
2. Release the Lock [D] to remove the FFC [E] from the Panel PCB ASSY [B].
After disconnecting the flat cable(s), check that each cable is not damaged at its end or
short-circuited.
When connecting the flat cable(s), do not insert it at an angle. After insertion, check
that the cable is not at an angle.
Comments to this Manuals