2.3 AUTO DOCUMENT FEEDER INSTALLATION
CAUTION
Unplug the copier power cord before starting the following procedure.
NOTE:
When installing the DF, use the tool [A] in the accessory bag or a
usual screw driver.
1. Unplug the document feeder. Then, remove all tapes.
2. Remove the left scale [B] (2 screws).
3. Place the DF exposure glass [C] on the glass holder.
4. Peel off the backing [D] of the double side tape attached to the rear side of
the scale guide [E], then install the scale guide (2 screws removed in step 2).
5. Attach the original size decal [F] to the scale guide.
NOTE:
Place the decal at the rear edge, and the left side flush with the
scale paper guide [G], as shown.
6. Install the stud screws [H] for the DF on the copier.
[A]
A628I500.wmf
A628I501.wmf
[B]
[E]
[F]
[C]
[H]
[D]
[G]
A628I502.wmf
COPIER INSTALLATION 1 August 1996
3-8
Comments to this Manuals