Ricoh SP 200 Specifications download pdf (Page 63)

5. PAPER FEED

5.1 OVERVIEW

There are two paper trays and a by-pass feed table [A].

The first [B] and second [C] paper trays each hold 250 sheets. The by-pass

feed table can hold 1, 10, or 100 sheets of paper, depending on the paper

size.

The semicircular feed rollers [D] drive the top sheet of paper from the tray to

the registration rollers [E] through the relay rollers [F].

The tray has two corner separators (see [F] in the diagram in the "Paper Lift

Mechanism" section), which allow only one sheet to feed at a time. The

corner seperators, along with the tray’s springs, also serve to set the height

of the paper stack.

When the tray is closed after the paper is loaded, the paper size actuator

located at the front right of the tray pushes the paper size sensor. This

informs the cpu what paper size is loaded in the tray and that the tray is in

place.

There is a relay sensor [G] located between the relay rollers. This sensor is

used for paper jam detection.

[G]

[A]

[C]

[B]

[F]

[E]

[D]

A193D022.wmf

PAPER FEED 1 August 1996

2-44

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 237 238

No comments

Ricoh SP 200 Specifications Page 63