10. STANDARD WHITE DENSITY ADJUSTMENT
This is to adjust the standard white density level.
Perform this adjustment in any of the following conditions:
•
After replacing the standard white plate.
•
After replacing the NVRAM on the BICU. (If only the BICU is replaced,
this adjustment is not necessary, as long as the NVRAM from the old
BICU is put on the new BICU.)
•
After performing a memory all clear (SP5-801).
Procedure:
1. Place 10 sheets of new A4 sideways or A3 paper on the exposure glass
and close the platen cover or the ADF.
2. Enter SP 4-908 and select "1:YES". The standard white density is
automatically adjusted.
STANDARD WHITE DENSITY ADJUSTMENT 1 August 1996
6-38
Comments to this Manuals