Scanner Disassemble Procedure
SM 4-63 M085/M086
Replacement
and
Adjustment
4.8.11 NCU PCB
1. Remove the Screw pan (S/P washer) M3.5x6 screw [A], and then remove the FG harness
[B] from the NCU shield [C].
2. Remove the two Taptite bind B M4x12 screws [D], and then remove the NCU shield [C]
from the Joint cover [E].
3. Turn over the NCU housing [A].
4. Remove the two Taptite cup S M3x6 SR screws [B], and then remove the NCU PCB [C]
Comments to this Manuals