Paper Feeding Problems
M085/M086 6-36 SM
6.3 PAPER FEEDING PROBLEMS
Problems related to paper feeding are end user recoverable if following the “User Check” items.
If the same problem occurs again, follow each procedure in the order of the number described
in the "Possible cause and Remedy".
6.3.1 NO FEEDING
Possible cause and Remedy
1. Edge actuator catching in some position
Does the edge actuator move smoothly?
No: Re-assemble the edge actuator and ensure smooth operation.
2. Roller holder ASSY catching in some position
Does the roller holder ASSY move smoothly?
Yes: Re-assemble the roller holder ASSY and ensure smooth operation.
3. Registration front sensor failure
Is the problem solved after replacing the registration front sensor PCB ASSY?
Yes: Replace the registration front sensor PCB ASSY.
4. Paper feeding kit failure
Is the surface of the separation pad or the pickup roller dirty or worn out?
Yes: 1) Clean the surface of the separation pad or pickup roller. 2) Replace the
separation pad or pickup roller.
5. Pressure plate gear damage
Is the pressure plate gear damaged?
Yes: Replace the paper tray.
6. T1 solenoid failure
Does the T1 solenoid work correctly?
No: Replace the T1 solenoid
7. T1 solenoid Circuit of the high-voltage power supply PCB broken
Is the problem solved after replacing the high-voltage power supply PCB ASSY?
Yes: Replace the high-voltage power supply PCB ASSY.
8. Main PCB failure
Is the problem solved after replacing the main PCB ASSY?
Yes: Replace the main PCB ASSY
9. Main motor failure
Is the problem solved after replacing the drive sub ASSY?
Yes: Replace the drive sub ASSY.
Comments to this Manuals