Paper Feeding Problems
M085/M086 6-40 SM
Curl in the paper
Possible cause and Remedy
1. High pressure of pressure roller in the fuser unit
Is the problem solved by changing the position of the pressure roller?
Yes: Change the position of the pressure roller.
1. Turn the Nip release lever [A] of right and left to the direction of the arrow.
2. Hold and turn the PR stopper plate [B] of right and left.
3. Print it again, and check that the curl in the paper occurs.
4. When there seems to be still the curl, replace the position of the pressure roller [C]
again.
Comments to this Manuals